Polytechnic College List

You are in Polytechnic College List > Karnataka > Bellary

List of Polytechnic Colleges in Bellary, Karnataka

Following list of polytechnic colleges or engineering schools are available in Bellary, Karnataka for studying Diploma Engineering. The Private and Government Polytechnic colleges in Bellary have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Bellary is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Ballari Rural Polytechnic

Ballari Rural Polytechnic is a Unaided - Private diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Kolur Village, Kolur Post, Bellary District, Bellary Taluk. This is not a women's diploma institute.



Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ballari Rural Polytechnic is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Metallurgy (1st shift)

Ballari Rural Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Metallurgy. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Metallurgy diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of Ballari Rural Polytechnic is Ballari Rural Polytechnic, Kolur Village, Kolur Post, Bellary District, Bellary Taluk, Karnataka, India.

Govenment Tool Room and Trainig Centre, Hospet


Govenment Tool Room and Trainig Centre, Hospet is a Government diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Government Tool Room and Training Centre, Indira Nagar, Harihara Road, Mariyammana Halli - 583 222 ( Hosapete), Tq - Hosapete, Dist - Bellary, Karnataka.. This is not a women's diploma institute.

Diploma Courses Offered

A Bellary polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Govenment Tool Room and Trainig Centre, Hospet is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Tool and Die Making (1st shift)

Govenment Tool Room and Trainig Centre, Hospet college offers a diploma in Tool and Die Making. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Tool and Die Making diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Govenment Tool Room and Trainig Centre, Hospet is Govenment Tool Room and Trainig Centre, Hospet, Government Tool Room and Training Centre, Indira Nagar, Harihara Road, Mariyammana Halli - 583 222 ( Hosapete), Tq - Hosapete, Dist - Bellary, Karnataka., India.

Government Polytechnic

Government Polytechnic is a Government diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Government Polytechnic, Govt First Grade College Campus, Hospet Road, Kampli.. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic is Government Polytechnic, Government Polytechnic, Govt First Grade College Campus, Hospet Road, Kampli., Bellary, Karnataka, India.

Government Polytechnic


Government Polytechnic is a Government diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Gudekote Road. This is not a women's diploma institute.

Diploma Courses Offered

A Karnataka polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic is Government Polytechnic, Gudekote Road, Bellary, Karnataka, India.

Government Polytechnic Bellary

Government Polytechnic Bellary is a Government diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Fort, Hospet Road. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic Bellary is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Sceince and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Industrial Safety (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Metallurgical Engineering (1st shift)

Government Polytechnic Bellary college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Sceince and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Sceince and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Industrial Safety. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Industrial Safety diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Metallurgical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Metallurgical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic Bellary is Government Polytechnic Bellary, Fort, Hospet Road, Bellary, Karnataka, India.

Hanagal Sri Kumareshwara Polytechnic, Bellary

Hanagal Sri Kumareshwara Polytechnic, Bellary is a Unaided - Private diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Rymec Campus, Cantonment Bellary - 583104. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Hanagal Sri Kumareshwara Polytechnic, Bellary is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Apparel Design and Fabrication Technology (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Metallurgical Engineering (1st shift)

Hanagal Sri Kumareshwara Polytechnic, Bellary college offers a diploma in Apparel Design and Fabrication Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Apparel Design and Fabrication Technology diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 108 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 108 for the academic year 2017-2018.

This college offers a diploma in Metallurgical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Metallurgical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Hanagal Sri Kumareshwara Polytechnic, Bellary is Hanagal Sri Kumareshwara Polytechnic, Bellary, Rymec Campus, Cantonment Bellary - 583104, Karnataka, India.

Jnanabharathi Polytechnic, Kudligi


Jnanabharathi Polytechnic, Kudligi is a Unaided - Private diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Sanduru Road. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Jnanabharathi Polytechnic, Kudligi is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Jnanabharathi Polytechnic, Kudligi college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Jnanabharathi Polytechnic, Kudligi is Jnanabharathi Polytechnic, Kudligi, Sanduru Road, Bellary, Karnataka, India.

Rajiv Gandhi Institute for Steel Technology

Rajiv Gandhi Institute for Steel Technology is a Unaided - Private diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Near Sanjeevani Hospital, V V Nagar, Jsw Steel Complex. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Rajiv Gandhi Institute for Steel Technology is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Industrial Safety (1st shift)
  • Full Time Diploma in Metallurgical Engineering (1st shift)

Rajiv Gandhi Institute for Steel Technology college offers a diploma in Industrial Safety. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Industrial Safety diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Metallurgical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Metallurgical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Rajiv Gandhi Institute for Steel Technology is Rajiv Gandhi Institute for Steel Technology, Near Sanjeevani Hospital, V V Nagar, Jsw Steel Complex, Bellary, Karnataka, India.

S. E. S. Polytechnic (Govt Aided)

S. E. S. Polytechnic (Govt Aided) is a Private-Aided diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Bellary Road Siruguppa - 583121. This is not a women's diploma institute.

Diploma Courses Offered

A Bellary polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. S. E. S. Polytechnic (Govt Aided) is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

S. E. S. Polytechnic (Govt Aided) college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 50 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of S. E. S. Polytechnic (Govt Aided) is S. E. S. Polytechnic (Govt Aided), Bellary Road Siruguppa - 583121, Karnataka, India.

Sandur Polytechnic

Sandur Polytechnic is a Unaided - Private diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Sandur Polytechnic, Yeshwantnagar, Via Sandur, Bellary District. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sandur Polytechnic is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Sceince and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sandur Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Computer Sceince and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Sceince and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Sandur Polytechnic is Sandur Polytechnic, Sandur Polytechnic, Yeshwantnagar, Via Sandur, Bellary District, Karnataka, India.

Sanjay Gandhi Polytechnic (Formerly “Sanjay Gandhi Rural Polytechnic”)


Sanjay Gandhi Polytechnic (Formerly “Sanjay Gandhi Rural Polytechnic”) is a Unaided - Private diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at "Vidhya Soudha", Sanjay Gandhi Nagar, Bellary. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sanjay Gandhi Polytechnic (Formerly “Sanjay Gandhi Rural Polytechnic”) is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Metallurgical Engineering (1st shift)

Sanjay Gandhi Polytechnic (Formerly “Sanjay Gandhi Rural Polytechnic”) college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 240 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 240 for the academic year 2017-2018.

This college offers a diploma in Metallurgical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Metallurgical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Sanjay Gandhi Polytechnic (Formerly “Sanjay Gandhi Rural Polytechnic”) is Sanjay Gandhi Polytechnic (Formerly “Sanjay Gandhi Rural Polytechnic”), "Vidhya Soudha", Sanjay Gandhi Nagar, Bellary, Karnataka, India.

Sri Renuka Integrated Polytechnic, Hagaribommanahalli

Sri Renuka Integrated Polytechnic, Hagaribommanahalli is a Unaided - Private diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Kudligi Road, Ramanagara, Hagaribommanahalli. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Renuka Integrated Polytechnic, Hagaribommanahalli is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sri Renuka Integrated Polytechnic, Hagaribommanahalli college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 50 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Sri Renuka Integrated Polytechnic, Hagaribommanahalli is Sri Renuka Integrated Polytechnic, Hagaribommanahalli, Kudligi Road, Ramanagara, Hagaribommanahalli, Bellary, Karnataka, India.

Tmaes Polytechnic

Tmaes Polytechnic is a Govt Aided diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Bellary Road. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Tmaes Polytechnic is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Metallurgical Engineering (1st shift)
  • Full Time Diploma in Mining Engineering (1st shift)

Tmaes Polytechnic college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 50 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 50 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Metallurgical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Metallurgical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Tmaes Polytechnic is Tmaes Polytechnic, Bellary Road, Karnataka, India.

Tmaes Sir M Visvesvaraya Polytechnic

Tmaes Sir M Visvesvaraya Polytechnic is a Unaided - Private diploma college located in the district of Bellary, Karnataka state of India. This polytechnic college is located at Sanklapur Bellary Road. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Tmaes Sir M Visvesvaraya Polytechnic is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechatronics (1st shift)


Tmaes Sir M Visvesvaraya Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechatronics. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechatronics diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Tmaes Sir M Visvesvaraya Polytechnic is Tmaes Sir M Visvesvaraya Polytechnic, Sanklapur Bellary Road, Karnataka, India.



Note: All courses are All India Council for Technical Education (AICTE) approved for the academic year 2017 - 2018.