Polytechnic College List

List of Polytechnic Colleges in Dakshina Kannada, Karnataka

Following list of polytechnic colleges or engineering schools are available in Dakshina Kannada, Karnataka for studying Diploma Engineering. The Private and Government Polytechnic colleges in Dakshina Kannada have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Dakshina Kannada is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Bearys Institute of Technology

Bearys Institute of Technology is a Unaided - Private diploma college located in the district of Dakshina Kannada, Karnataka state of India. This polytechnic college is located at Lands End, Innoli, Boliyar Village Near Mangalore University Mangalore - 574 153. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Bearys Institute of Technology is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Civil Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)

Bearys Institute of Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Bearys Institute of Technology is Bearys Institute of Technology, Lands End, Innoli, Boliyar Village Near Mangalore University Mangalore - 574 153, Dakshina Kannada, Karnataka, India.

Govt Tool Room and Trg Centre, Mangalore

Govt Tool Room and Trg Centre, Mangalore is a Government diploma college located in the district of Dakshina Kannada, Karnataka state of India. This polytechnic college is located at B131 - 132, Industrial Estate Baikampady. This is not a women's diploma institute.

Diploma Courses Offered

A Dakshina Kannada polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Govt Tool Room and Trg Centre, Mangalore is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Precision Manufacturing (1st shift)
  • Full Time Diploma in Tool and Die Making (1st shift)

Govt Tool Room and Trg Centre, Mangalore college offers a diploma in Precision Manufacturing. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Precision Manufacturing diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Tool and Die Making. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Tool and Die Making diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Govt Tool Room and Trg Centre, Mangalore is Govt Tool Room and Trg Centre, Mangalore, B131 - 132, Industrial Estate Baikampady, Dakshina Kannada, Karnataka, India.

Karavali Polytechnic

Karavali Polytechnic is a Unaided - Private diploma college located in the district of Dakshina Kannada, Karnataka state of India. This polytechnic college is located at Karavali Polytechnic Padu Post, Pedumale, Neerumarga, Mangalore. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Karavali Polytechnic is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Aeronautical Engineering (1st shift)
  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Karavali Polytechnic college offers a diploma in Aeronautical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Aeronautical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Karavali Polytechnic is Karavali Polytechnic, Karavali Polytechnic Padu Post, Pedumale, Neerumarga, Mangalore, Dakshina Kannada, Karnataka, India.

Karnataka (Government ) Polytechnic

Karnataka (Government ) Polytechnic is a Government diploma college located in the district of Dakshina Kannada, Karnataka state of India. This polytechnic college is located at Kadri Hills. This is not a women's diploma institute.

Diploma Courses Offered

A Karnataka polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Karnataka (Government ) Polytechnic is a diploma college that offers 10 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Chemical Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Part Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Part Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Polymer Technology (1st shift)

Karnataka (Government ) Polytechnic college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Chemical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Chemical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Polymer Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Polymer Technology diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Karnataka (Government ) Polytechnic is Karnataka (Government ) Polytechnic, Kadri Hills, Dakshina Kannada, Karnataka, India.

Kurunji Venkatramana Gowda Polytechnic

Kurunji Venkatramana Gowda Polytechnic is a Govt Aided diploma college located in the district of Dakshina Kannada, Karnataka state of India. This polytechnic college is located at Kurunjibhag. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Kurunji Venkatramana Gowda Polytechnic is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Kurunji Venkatramana Gowda Polytechnic college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 55 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Kurunji Venkatramana Gowda Polytechnic is Kurunji Venkatramana Gowda Polytechnic, Kurunjibhag, Dakshina Kannada, Karnataka, India.

P. A Polytechnic

P. A Polytechnic is a Unaided - Private diploma college located in the district of Dakshina Kannada, Karnataka state of India. This polytechnic college is located at Nadupadav, Montepadav Post, Kairangala, Near Mangalore University. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. P. A Polytechnic is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

P. A Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 180 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of P. A Polytechnic is P. A Polytechnic, Nadupadav, Montepadav Post, Kairangala, Near Mangalore University, Dakshina Kannada, Karnataka, India.

S N Mudbidri Polytechnic, Moodbidri

S N Mudbidri Polytechnic, Moodbidri is a Govt Aided diploma college located in the district of Dakshina Kannada, Karnataka state of India. This polytechnic college is located at Kodangallu Post, Mangalore Taluk - 574197.. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. S N Mudbidri Polytechnic, Moodbidri is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechatronics (1st shift)

S N Mudbidri Polytechnic, Moodbidri college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 50 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechatronics. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechatronics diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of S N Mudbidri Polytechnic, Moodbidri is S N Mudbidri Polytechnic, Moodbidri, Kodangallu Post, Mangalore Taluk - 574197., Dakshina Kannada, Karnataka, India.

Sri Dharmasthala Manjunatheshwara Polytechnic, Ujire

Sri Dharmasthala Manjunatheshwara Polytechnic, Ujire is a Unaided - Private diploma college located in the district of Dakshina Kannada, Karnataka state of India. This polytechnic college is located at Ujire Belthangadi Talluk Dakshina Kannada District Karnataka 574240. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Dharmasthala Manjunatheshwara Polytechnic, Ujire is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sri Dharmasthala Manjunatheshwara Polytechnic, Ujire college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Sri Dharmasthala Manjunatheshwara Polytechnic, Ujire is Sri Dharmasthala Manjunatheshwara Polytechnic, Ujire, Ujire Belthangadi Talluk Dakshina Kannada District Karnataka 574240, India.