Polytechnic College List

List of Polytechnic Colleges in Udupi, Karnataka

Following list of polytechnic colleges or engineering schools are available in Udupi, Karnataka for studying Diploma Engineering. The Private and Government Polytechnic colleges in Udupi have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Udupi is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Dr. T. M. A. Pai Polytechnic

Dr. T. M. A. Pai Polytechnic is a Unaided - Private diploma college located in the district of Udupi, Karnataka state of India. This polytechnic college is located at Milk Dairy Road; Eshwar Nagar. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Dr. T. M. A. Pai Polytechnic is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechatronics (1st shift)
  • Full Time Diploma in Printing Technology (1st shift)

Dr. T. M. A. Pai Polytechnic college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Mechatronics. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechatronics diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Printing Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Printing Technology diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Dr. T. M. A. Pai Polytechnic is Dr. T. M. A. Pai Polytechnic, Milk Dairy Road; Eshwar Nagar, Udupi, Karnataka, India.

Government Polytechnic

Government Polytechnic is a Government diploma college located in the district of Udupi, Karnataka state of India. This polytechnic college is located at Government Polytechnic, Udupi. This is not a women's diploma institute.

Diploma Courses Offered

A Udupi polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic is Government Polytechnic, Government Polytechnic, Udupi, Karnataka, India.

Government Polytechnic Karkala

Government Polytechnic Karkala is a Government diploma college located in the district of Udupi, Karnataka state of India. This polytechnic college is located at Government Womens Polytechnic Karkala, Near Police Station Taluk Office, Karkala, Udupi District - 574104, Karnataka. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic Karkala is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic Karkala college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic Karkala is Government Polytechnic Karkala, Government Womens Polytechnic Karkala, Near Police Station Taluk Office, Karkala, Udupi District - 574104, Karnataka, India.

Indhira Shiva Rao Polytechnic

Indhira Shiva Rao Polytechnic is a Unaided - Private diploma college located in the district of Udupi, Karnataka state of India. This polytechnic college is located at Kadiyali. This is not a women's diploma institute.

Diploma Courses Offered

A Karnataka polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Indhira Shiva Rao Polytechnic is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Apparel Design and Fashion Technology (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Indhira Shiva Rao Polytechnic college offers a diploma in Apparel Design and Fashion Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Apparel Design and Fashion Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Indhira Shiva Rao Polytechnic is Indhira Shiva Rao Polytechnic, Kadiyali, Udupi, Karnataka, India.

Kamath Institute of Technology (Polytechnic)

Kamath Institute of Technology (Polytechnic) is a Unaided - Private diploma college located in the district of Udupi, Karnataka state of India. This polytechnic college is located at "Saptagiri" Koteshwara - Halady Main Road Hombady - Mandady Village Kundapura Taluk. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Kamath Institute of Technology (Polytechnic) is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Kamath Institute of Technology (Polytechnic) college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Kamath Institute of Technology (Polytechnic) is Kamath Institute of Technology (Polytechnic), "Saptagiri" Koteshwara - Halady Main Road Hombady - Mandady Village Kundapura Taluk, Udupi, Karnataka, India.

Manipal College of Pharmaceutical Sciences

Manipal College of Pharmaceutical Sciences is a Deemed University(Private) diploma college located in the district of Udupi, Karnataka state of India. This polytechnic college is located at Manipal College of Pharmaceutical Sciences Madhav Nagar, Manipal 576 104 Udupi District, Karnatka State. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Manipal College of Pharmaceutical Sciences is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Pharmacy (1st shift)

Manipal College of Pharmaceutical Sciences college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 100 for the academic year 2017-2018.

Contact Details

The addres of Manipal College of Pharmaceutical Sciences is Manipal College of Pharmaceutical Sciences, Manipal College of Pharmaceutical Sciences Madhav Nagar, Manipal 576 104 Udupi District, Karnatka State, Karnataka, India.

N. R. A. M. Polytechnic

N. R. A. M. Polytechnic is a Govt Aided diploma college located in the district of Udupi, Karnataka state of India. This polytechnic college is located at Net Campus Nitte Karkala (Tq) Udupi District Karnataka. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. N. R. A. M. Polytechnic is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Fashion and Apparel Design (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Modern Office Practice (1st shift)

N. R. A. M. Polytechnic college offers a diploma in Fashion and Apparel Design. This course falls under the Applied Arts and Crafts programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Fashion and Apparel Design diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 50 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 50 for the academic year 2017-2018.

This college offers a diploma in Modern Office Practice. This course falls under the Management programme. This course is affiliated under Department of Technical Education, Bangalore. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Practice diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of N. R. A. M. Polytechnic is N. R. A. M. Polytechnic, Net Campus Nitte Karkala (Tq) Udupi District Karnataka, India.