Polytechnic College List

List of Polytechnic Colleges in Angul, Odisha

Following list of polytechnic colleges or engineering schools are available in Angul, Odisha for studying Diploma Engineering. The Private and Government Polytechnic colleges in Angul have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Angul is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Adarsha College of Engineering

Adarsha College of Engineering is a Unaided - Private diploma college located in the district of Angul, Odisha state of India. This polytechnic college is located at At - Saradhapur, Po - Kumurisingha, Via/Dist - Angul, Pin - 759122 Orissa. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Adarsha College of Engineering is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Electrical Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)
  • Full Time Diploma in Mining Engineering (2nd shift)

Adarsha College of Engineering college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education and Training, Odisha. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Adarsha College of Engineering is Adarsha College of Engineering, At - Saradhapur, Po - Kumurisingha, Via/Dist - Angul, Pin - 759122 Orissa, Odisha, India.

Adarsha School of Engineering and International Polytechnic

Adarsha School of Engineering and International Polytechnic is a Unaided - Private diploma college located in the district of Angul, Odisha state of India. This polytechnic college is located at At - Saradhapur Po - Kumurisingha, Via/Dist - Angul Odisha 759122. This is not a women's diploma institute.

Diploma Courses Offered

A Angul polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Adarsha School of Engineering and International Polytechnic is a diploma college that offers 10 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Part Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Part Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electronics and Tele - Communication Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Part Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mining Engineering (1st shift)
  • Part Time Diploma in Mining Engineering (1st shift)

Adarsha School of Engineering and International Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Tele - Communication Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Tele - Communication Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Adarsha School of Engineering and International Polytechnic is Adarsha School of Engineering and International Polytechnic, At - Saradhapur Po - Kumurisingha, Via/Dist - Angul Odisha 759122, India.

Government Polytechnic Angul

Government Polytechnic Angul is a Government diploma college located in the district of Angul, Odisha state of India. This polytechnic college is located at At - Kusasinga Po - Rantalei. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic Angul is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic Angul college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic Angul is Government Polytechnic Angul, At - Kusasinga Po - Rantalei, Angul, Odisha, India.

Narayani Institute of Engineering and Technology

Narayani Institute of Engineering and Technology is a Unaided - Private diploma college located in the district of Angul, Odisha state of India. This polytechnic college is located at At - Arahat Po - Banarpal Dist - Angul. This is not a women's diploma institute.

Diploma Courses Offered

A Odisha polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Narayani Institute of Engineering and Technology is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electronics and Tele - Communication Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Part Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mining Engineering (1st shift)
  • Full Time Diploma in Mining Engineering (2nd shift)

Narayani Institute of Engineering and Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 180 for the academic year 2017-2018.

This college offers a diploma in Electronics and Tele - Communication Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Tele - Communication Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Narayani Institute of Engineering and Technology is Narayani Institute of Engineering and Technology, At - Arahat Po - Banarpal Dist - Angul, Odisha, India.

Pabitra Mohan Institute of Technology

Pabitra Mohan Institute of Technology is a Unaided - Private diploma college located in the district of Angul, Odisha state of India. This polytechnic college is located at At/Po: - Manikamara, Dharampur, Talcher Dist: - Angul Pin: - 759100. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Pabitra Mohan Institute of Technology is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electronics and Tele - Communication Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Metallurgy (1st shift)
  • Full Time Diploma in Mining Engineering (1st shift)

Pabitra Mohan Institute of Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 20 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Tele - Communication Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Tele - Communication Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Metallurgy. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Metallurgy diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Pabitra Mohan Institute of Technology is Pabitra Mohan Institute of Technology, At/Po: - Manikamara, Dharampur, Talcher Dist: - Angul Pin: - 759100, Odisha, India.

Pathani Samanta Institute of Engineering and Technology

Pathani Samanta Institute of Engineering and Technology is a Unaided - Private diploma college located in the district of Angul, Odisha state of India. This polytechnic college is located at At - Karanda Po - Karanda Via - Gudiakateni Dist - Dhenkanal. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Pathani Samanta Institute of Engineering and Technology is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electronics and Tele - Communication Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mining Engineering (1st shift)

Pathani Samanta Institute of Engineering and Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Tele - Communication Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Tele - Communication Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Pathani Samanta Institute of Engineering and Technology is Pathani Samanta Institute of Engineering and Technology, At - Karanda Po - Karanda Via - Gudiakateni Dist - Dhenkanal, Angul, Odisha, India.

Purna Chandra Institute of Engineering and Technology

Purna Chandra Institute of Engineering and Technology is a Unaided - Private diploma college located in the district of Angul, Odisha state of India. This polytechnic college is located at At - Chhendipada Po - Chhendipada Ps - Chhendipada Dist - Angul Pin - 759124 Orissa. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Purna Chandra Institute of Engineering and Technology is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mining Engineering (1st shift)

Purna Chandra Institute of Engineering and Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mining Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Odisha. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mining Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Purna Chandra Institute of Engineering and Technology is Purna Chandra Institute of Engineering and Technology, At - Chhendipada Po - Chhendipada Ps - Chhendipada Dist - Angul Pin - 759124 Orissa, Odisha, India.