Polytechnic College List

You are in Polytechnic College List > Punjab > Jalandhar

List of Polytechnic Colleges in Jalandhar, Punjab

Following list of polytechnic colleges or engineering schools are available in Jalandhar, Punjab for studying Diploma Engineering. The Private and Government Polytechnic colleges in Jalandhar have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Jalandhar is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Central Institute of Hand Tools Jalandhar

Central Institute of Hand Tools Jalandhar is a Government diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at G. T. Road, Bye Pass, Opposite Bhagat Singh Colony, Jalandhar. This is not a women's diploma institute.



Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Central Institute of Hand Tools Jalandhar is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)

Central Institute of Hand Tools Jalandhar college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Tool and Die). This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Tool and Die) diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Central Institute of Hand Tools Jalandhar is Central Institute of Hand Tools Jalandhar, G. T. Road, Bye Pass, Opposite Bhagat Singh Colony, Jalandhar, Punjab, India.

Ct Polytechnic College


Ct Polytechnic College is a Unaided - Private diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at Vill. Shahpur, P. O. Udopur, Distt, Jalandhar. This is not a women's diploma institute.

Diploma Courses Offered

A Jalandhar polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ct Polytechnic College is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Information Technology (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Medical Laboratory Technology (1st shift)

Ct Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 150 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 150 for the academic year 2017-2018.

This college offers a diploma in Medical Laboratory Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Medical Laboratory Technology diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of Ct Polytechnic College is Ct Polytechnic College, Vill. Shahpur, P. O. Udopur, Distt, Jalandhar, Punjab, India.

Government Inst. of Leather and Footwear Technology

Government Inst. of Leather and Footwear Technology is a Government diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at Nakdar Road. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Inst. of Leather and Footwear Technology is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Footwear Technology (1st shift)
  • Full Time Diploma in Leather Technology (1st shift)

Government Inst. of Leather and Footwear Technology college offers a diploma in Footwear Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Footwear Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Leather Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Leather Technology diploma course is 25 for the academic year 2017-2018.

Contact Details

The addres of Government Inst. of Leather and Footwear Technology is Government Inst. of Leather and Footwear Technology, Nakdar Road, Jalandhar, Punjab, India.

Government Polytechnic College for Girls Jalandhar


Government Polytechnic College for Girls Jalandhar is a Government diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at Ladowali Road. This is not a women's diploma institute.

Diploma Courses Offered

A Punjab polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic College for Girls Jalandhar is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Architecture Assitantship (1st shift)
  • Full Time Diploma in Chemical Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Information Technology (1st shift)
  • Full Time Diploma in Library and Information Science (1st shift)
  • Full Time Diploma in Modern Office Practice (1st shift)
  • Full Time Diploma in Pharmacy (1st shift)

Government Polytechnic College for Girls Jalandhar college offers a diploma in Architecture Assitantship. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Architecture Assitantship diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Chemical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Chemical Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Library and Information Science. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Library and Information Science diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Modern Office Practice. This course falls under the Management programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Practice diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic College for Girls Jalandhar is Government Polytechnic College for Girls Jalandhar, Ladowali Road, Jalandhar, Punjab, India.

Guru Nanak Polytechnic

Guru Nanak Polytechnic is a Unaided - Private diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at Village Koopur, Po Adda Kathar,. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Guru Nanak Polytechnic is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Guru Nanak Polytechnic college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Guru Nanak Polytechnic is Guru Nanak Polytechnic, Village Koopur, Po Adda Kathar,, Jalandhar, Punjab, India.

Mehr Chand Polytechnic College

Mehr Chand Polytechnic College is a Govt Aided diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at Dayanand Nagar G. T. Road. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Mehr Chand Polytechnic College is a diploma college that offers 13 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Architectural Assistantship (1st shift)
  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (2nd shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (2nd shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (2nd shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (2nd shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)
  • Full Time Diploma in Pharmacy (1st shift)

Mehr Chand Polytechnic College college offers a diploma in Architectural Assistantship. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Architectural Assistantship diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Mehr Chand Polytechnic College is Mehr Chand Polytechnic College, Dayanand Nagar G. T. Road, Jalandhar, Punjab, India.

Satyam College of Polytechnic


Satyam College of Polytechnic is a Unaided - Private diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at Opp Allowal Gate. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Satyam College of Polytechnic is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Satyam College of Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Satyam College of Polytechnic is Satyam College of Polytechnic, Opp Allowal Gate, Jalandhar, Punjab, India.

Singha College of Pharmacy

Singha College of Pharmacy is a Unaided - Private diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at Singha College of Pharmacy, Vill. Singh, Near Lambra, Nakodar Road, Jalandher. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Singha College of Pharmacy is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Pharmacy (1st shift)

Singha College of Pharmacy college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Singha College of Pharmacy is Singha College of Pharmacy, Singha College of Pharmacy, Vill. Singh, Near Lambra, Nakodar Road, Jalandher, Jalandhar, Punjab, India.

St. Soldier Institute of Pharmacy and Polytechnic

St. Soldier Institute of Pharmacy and Polytechnic is a Unaided - Private diploma college located in the district of Jalandhar, Punjab state of India. This polytechnic college is located at Vpo Lidhran Behind Nit/Jalandhar - Amritsar Bye Pass. This is not a women's diploma institute.

Diploma Courses Offered

A Jalandhar polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. St. Soldier Institute of Pharmacy and Polytechnic is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (2nd shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Tool and Die Making (1st shift)
  • Full Time Diploma in Pharmacy (1st shift)


St. Soldier Institute of Pharmacy and Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Tool and Die Making. This course falls under the Engineering and Technology programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Tool and Die Making diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Punjab State Board of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of St. Soldier Institute of Pharmacy and Polytechnic is St. Soldier Institute of Pharmacy and Polytechnic, Vpo Lidhran Behind Nit/Jalandhar - Amritsar Bye Pass, Punjab, India.



Note: All courses are All India Council for Technical Education (AICTE) approved for the academic year 2017 - 2018.