Polytechnic College List

You are in Polytechnic College List > Tamil Nadu > Chennai

List of Polytechnic Colleges in Chennai, Tamil Nadu

Following list of polytechnic colleges or engineering schools are available in Chennai, Tamil Nadu for studying Diploma Engineering. The Private and Government Polytechnic colleges in Chennai have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Chennai is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

C. L. Baid Metha College of Pharmacy

C. L. Baid Metha College of Pharmacy is a Unaided - Private diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at Rajiv Gandhi Salai, Old Mahabalipuram Road, Thoraipakkam, Chennai 600 097. This is not a women's diploma institute.



Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. C. L. Baid Metha College of Pharmacy is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Pharmacy (1st shift)

C. L. Baid Metha College of Pharmacy college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Tamil Nadu Dr. M. G. R. Medical University, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of C. L. Baid Metha College of Pharmacy is C. L. Baid Metha College of Pharmacy, Rajiv Gandhi Salai, Old Mahabalipuram Road, Thoraipakkam, Chennai 600 097, Tamil Nadu, India.

Central Institute of Plastics Engineering and Technology


Central Institute of Plastics Engineering and Technology is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at T. V. K Indusutrial Estate, Guindy. This is not a women's diploma institute.

Diploma Courses Offered

A Chennai polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Central Institute of Plastics Engineering and Technology is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Plastic Mould Design (1st shift)
  • Full Time Diploma in Plastic Mould Technology (Dpmt) (1st shift)
  • Full Time Diploma in Plastic Mould Technology (Dpmt/Pdpmt) (1st shift)
  • Full Time Diploma in Plastic Technology (Dpt/Pdpt) (1st shift)
  • Full Time Diploma in Plastic Technology (Dpt/Pdpt) (1st shift)
  • Full Time Diploma in Plastics Processing and Testing (1st shift)

Central Institute of Plastics Engineering and Technology college offers a diploma in Plastic Mould Design. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastic Mould Design diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Plastic Mould Technology (Dpmt). This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastic Mould Technology (Dpmt) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Plastic Mould Technology (Dpmt/Pdpmt). This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastic Mould Technology (Dpmt/Pdpmt) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Plastic Technology (Dpt/Pdpt). This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastic Technology (Dpt/Pdpt) diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Plastic Technology (Dpt/Pdpt). This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastic Technology (Dpt/Pdpt) diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Plastics Processing and Testing. This course falls under the Engineering and Technology programme. This course is affiliated under None. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastics Processing and Testing diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Central Institute of Plastics Engineering and Technology is Central Institute of Plastics Engineering and Technology, T. V. K Indusutrial Estate, Guindy, Chennai, Tamil Nadu, India.

Central Polytechnic College

Central Polytechnic College is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at Cit Campus, Tharamani. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Central Polytechnic College is a diploma college that offers 17 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (2nd shift)
  • Part Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (2nd shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (2nd shift)
  • Part Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (2nd shift)
  • Part Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Fisheries Technology (1st shift)
  • Full Time Diploma in Marine Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)
  • Part Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Sandwich) (1st shift)

Central Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 20 for the academic year 2017-2018.

This college offers a diploma in Fisheries Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Fisheries Technology diploma course is 20 for the academic year 2017-2018.

This college offers a diploma in Marine Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Marine Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 160 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 140 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 80 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Sandwich). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Sandwich) diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Central Polytechnic College is Central Polytechnic College, Cit Campus, Tharamani, Chennai, Tamil Nadu, India.

Don Bosco Polytechnic College


Don Bosco Polytechnic College is a Unaided - Private diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at 106 D'Castor Road, Basin Bridge. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Don Bosco Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Prod) (1st shift)
  • Full Time Diploma in Mechanical Engineering (Refrigeration and Air Conditioning) (1st shift)

Don Bosco Polytechnic College college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Refrigeration and Air Conditioning). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Refrigeration and Air Conditioning) diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Don Bosco Polytechnic College is Don Bosco Polytechnic College, 106 D'Castor Road, Basin Bridge, Chennai, Tamil Nadu, India.

Dr Dharmambal Govt Polytechnic College for Women

Dr Dharmambal Govt Polytechnic College for Women is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at Tharamani Chennai - 600113. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Dr Dharmambal Govt Polytechnic College for Women is a diploma college that offers 9 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Cosmetology (1st shift)
  • Full Time Diploma in Architecture Assistantship (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Environmental Engineering (1st shift)
  • Full Time Diploma in Garment Technology (1st shift)
  • Full Time Diploma in Instrumentation and Control Engineering (1st shift)
  • Full Time Diploma in Modern Office Practice (1st shift)

Dr Dharmambal Govt Polytechnic College for Women college offers a diploma in Cosmetology. This course falls under the Applied Arts and Crafts programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Cosmetology diploma course is 10 for the academic year 2017-2018.

This college offers a diploma in Architecture Assistantship. This course falls under the Architecture programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Architecture Assistantship diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 20 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Environmental Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Environmental Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Garment Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Garment Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Instrumentation and Control Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Instrumentation and Control Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Modern Office Practice. This course falls under the Management programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Practice diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Dr Dharmambal Govt Polytechnic College for Women is Dr Dharmambal Govt Polytechnic College for Women, Tharamani Chennai - 600113, Tamil Nadu, India.

Empee Institute of Hotel Management and Catering Technology

Empee Institute of Hotel Management and Catering Technology is a Unaided - Private diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at D - 103 Annanagar (East), Chennai - 600102. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Empee Institute of Hotel Management and Catering Technology is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Hotel Management and Catering Technology (1st shift)

Empee Institute of Hotel Management and Catering Technology college offers a diploma in Hotel Management and Catering Technology. This course falls under the Hotel Management and Catering programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Hotel Management and Catering Technology diploma course is 50 for the academic year 2017-2018.

Contact Details

The addres of Empee Institute of Hotel Management and Catering Technology is Empee Institute of Hotel Management and Catering Technology, D - 103 Annanagar (East), Chennai - 600102, Tamil Nadu, India.

Government Polytechnic College


Government Polytechnic College is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at Subbarayan Main Road Nammalwarpet Chennai. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (2nd shift)
  • Full Time Diploma in Information Technology (1st shift)
  • Full Time Diploma in Information Technology (2nd shift)
  • Full Time Diploma in Mechatronics (1st shift)
  • Full Time Diploma in Mechatronics (2nd shift)

Government Polytechnic College college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechatronics. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechatronics diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechatronics. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechatronics diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic College is Government Polytechnic College, Subbarayan Main Road Nammalwarpet Chennai, Tamil Nadu, India.

Government Polytechnic College, Rk Nagar

Government Polytechnic College, Rk Nagar is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at Kamaraj Salai, Tondiarpet, Chennai - 81. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic College, Rk Nagar is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic College, Rk Nagar college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic College, Rk Nagar is Government Polytechnic College, Rk Nagar, Kamaraj Salai, Tondiarpet, Chennai - 81, Tamil Nadu, India.

Government Technical Training Centre

Government Technical Training Centre is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at 100 Feet Road, Industrial Estate, Guindy, Chennai 32. This is not a women's diploma institute.

Diploma Courses Offered

A Chennai polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Technical Training Centre is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)
  • Full Time Diploma in Mechanical Engineering Refrigeration and Air Conditioning (1st shift)
  • Full Time Diploma in Tool and Die Engineering (1st shift)

Government Technical Training Centre college offers a diploma in Mechanical Engineering (Tool and Die). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Tool and Die) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Refrigeration and Air Conditioning. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Refrigeration and Air Conditioning diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Tool and Die Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Tool and Die Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Technical Training Centre is Government Technical Training Centre, 100 Feet Road, Industrial Estate, Guindy, Chennai 32, Tamil Nadu, India.

Institute of Leather Technology

Institute of Leather Technology is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at C I T Campus, Rajiv Gandhi Salai, Tharamani,. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Institute of Leather Technology is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Leather Technology (1st shift)

Institute of Leather Technology college offers a diploma in Leather Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Leather Technology diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Institute of Leather Technology is Institute of Leather Technology, C I T Campus, Rajiv Gandhi Salai, Tharamani,, Chennai, Tamil Nadu, India.

Institute of Printing Technology


Institute of Printing Technology is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at Cit Campus Tharamani Chennai. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Institute of Printing Technology is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Printing Technology (1st shift)

Institute of Printing Technology college offers a diploma in Printing Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Printing Technology diploma course is 90 for the academic year 2017-2018.

Contact Details

The addres of Institute of Printing Technology is Institute of Printing Technology, Cit Campus Tharamani Chennai, Tamil Nadu, India.

Institute of Textile Technology

Institute of Textile Technology is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at C. I. T Campus, Tharamani. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Institute of Textile Technology is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Textile Technology (1st shift)

Institute of Textile Technology college offers a diploma in Textile Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Textile Technology diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Institute of Textile Technology is Institute of Textile Technology, C. I. T Campus, Tharamani, Chennai, Tamil Nadu, India.

P. T. Lee Chengalvaraya Naicker Polytechnic College

P. T. Lee Chengalvaraya Naicker Polytechnic College is a Govt Aided diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at P. T. Lee Chengalvaraya Naicker Polytechnic College, 2 and 3, E. V. K Sampath Salai, Vepery, Chennai - 600007. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. P. T. Lee Chengalvaraya Naicker Polytechnic College is a diploma college that offers 10 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Part Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Part Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Part Time Diploma in Mechanical Engineering (1st shift)

P. T. Lee Chengalvaraya Naicker Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of P. T. Lee Chengalvaraya Naicker Polytechnic College is P. T. Lee Chengalvaraya Naicker Polytechnic College, P. T. Lee Chengalvaraya Naicker Polytechnic College, 2 and 3, E. V. K Sampath Salai, Vepery, Chennai - 600007, Tamil Nadu, India.

Panimalar Polytechnic College

Panimalar Polytechnic College is a Unaided - Private diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at 23, Railway Colony Ii Street, Nelson Manickam Road, Chennai.. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Panimalar Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Panimalar Polytechnic College college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Panimalar Polytechnic College is Panimalar Polytechnic College, 23, Railway Colony Ii Street, Nelson Manickam Road, Chennai., Tamil Nadu, India.

Ramakrishna Mission Polytechnic College

Ramakrishna Mission Polytechnic College is a Govt Aided diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at 66, Sir P. S. Sivasami Salai, Mylapore, Chennai. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ramakrishna Mission Polytechnic College is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Ramakrishna Mission Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Ramakrishna Mission Polytechnic College is Ramakrishna Mission Polytechnic College, 66, Sir P. S. Sivasami Salai, Mylapore, Chennai, Tamil Nadu, India.

Siga Polytechnic College


Siga Polytechnic College is a Unaided - Private diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at #49, Taylors Road, Kilpauk. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Siga Polytechnic College is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Printing Technology (1st shift)

Siga Polytechnic College college offers a diploma in Printing Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Printing Technology diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Siga Polytechnic College is Siga Polytechnic College, #49, Taylors Road, Kilpauk, Chennai, Tamil Nadu, India.

State Institute of Commerce Education

State Institute of Commerce Education is a Government diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at Cit Campus Tharamani, Chennai - 113. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. State Institute of Commerce Education is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Modern Office Practice (1st shift)

State Institute of Commerce Education college offers a diploma in Modern Office Practice. This course falls under the Management programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Practice diploma course is 75 for the academic year 2017-2018.

Contact Details

The addres of State Institute of Commerce Education is State Institute of Commerce Education, Cit Campus Tharamani, Chennai - 113, Tamil Nadu, India.

V. Ramakrishna Polytechnic College

V. Ramakrishna Polytechnic College is a Unaided - Private diploma college located in the district of Chennai, Tamil Nadu state of India. This polytechnic college is located at Manali Road, Thiruvottiyur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. V. Ramakrishna Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)


V. Ramakrishna Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of V. Ramakrishna Polytechnic College is V. Ramakrishna Polytechnic College, Manali Road, Thiruvottiyur, Chennai, Tamil Nadu, India.



Note: All courses are All India Council for Technical Education (AICTE) approved for the academic year 2017 - 2018.