Polytechnic College List

List of Polytechnic Colleges in Cuddalore, Tamil Nadu

Following list of polytechnic colleges or engineering schools are available in Cuddalore, Tamil Nadu for studying Diploma Engineering. The Private and Government Polytechnic colleges in Cuddalore have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Cuddalore is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Annai Madha Polytechnic College

Annai Madha Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Edaicheruvai, Akkanur (Po), Tittagudi (Tk). This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Annai Madha Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Tool and Die Engineering (1st shift)

Annai Madha Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

This college offers a diploma in Tool and Die Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Tool and Die Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Annai Madha Polytechnic College is Annai Madha Polytechnic College, Edaicheruvai, Akkanur (Po), Tittagudi (Tk), Cuddalore, Tamil Nadu, India.

Annai Velankanni Polytechnic College

Annai Velankanni Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at No. 8 Salem Main Road, Anguchettypalayam, Siruvathur Post, Panruti Taluk Cuddalore District Tamilnadu. This is not a women's diploma institute.

Diploma Courses Offered

A Cuddalore polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Annai Velankanni Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Annai Velankanni Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Annai Velankanni Polytechnic College is Annai Velankanni Polytechnic College, No. 8 Salem Main Road, Anguchettypalayam, Siruvathur Post, Panruti Taluk Cuddalore District Tamilnadu, Tamil Nadu, India.

Aries Polytechnic College

Aries Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Karunguzhi. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Aries Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Instrumentation and Control (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Aries Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Instrumentation and Control. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Instrumentation and Control diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Aries Polytechnic College is Aries Polytechnic College, Karunguzhi, Cuddalore, Tamil Nadu, India.

Ayyappa Polytechnic College

Ayyappa Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Aivadhugudi, Eranji Post, Virudhachalam Taluk, Cuddalore District.. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ayyappa Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)
  • Full Time Diploma in Mechatronics (1st shift)

Ayyappa Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechatronics. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechatronics diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Ayyappa Polytechnic College is Ayyappa Polytechnic College, Aivadhugudi, Eranji Post, Virudhachalam Taluk, Cuddalore District., Tamil Nadu, India.

Easwar Polytechnic College

Easwar Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Rettakururichi (Post), Tittagudi (Taluk)Cuddalore (District). This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Easwar Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Easwar Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Easwar Polytechnic College is Easwar Polytechnic College, Rettakururichi (Post), Tittagudi (Taluk)Cuddalore (District), Tamil Nadu, India.

Government Polytechnic College

Government Polytechnic College is a Government diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Kooduveli Village, Kattumannarkoil Taluk.. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Tamil Nadu. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Tamil Nadu. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Tamil Nadu. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Tamil Nadu. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Tamil Nadu. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic College is Government Polytechnic College, Kooduveli Village, Kattumannarkoil Taluk., Cuddalore, Tamil Nadu, India.

Institute of Ceramic Technology

Institute of Ceramic Technology is a Government diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Aladi Road Vridhachalam. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Institute of Ceramic Technology is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Ceramic Technology (1st shift)

Institute of Ceramic Technology college offers a diploma in Ceramic Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Ceramic Technology diploma course is 50 for the academic year 2017-2018.

Contact Details

The addres of Institute of Ceramic Technology is Institute of Ceramic Technology, Aladi Road Vridhachalam, Cuddalore, Tamil Nadu, India.

Kamarajar Polytechnic College

Kamarajar Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at 1016, Thiruppaninatham, Ennanagaram Post, Chidambaram Taluk. Cuddalore District, Tamilnadu.. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Kamarajar Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Kamarajar Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 240 for the academic year 2017-2018.

Contact Details

The addres of Kamarajar Polytechnic College is Kamarajar Polytechnic College, 1016, Thiruppaninatham, Ennanagaram Post, Chidambaram Taluk. Cuddalore District, Tamilnadu., Tamil Nadu, India.

Krishnasamy Memorial Polytechnic College

Krishnasamy Memorial Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Nellikuppam High Road, S. Kumarapuram, Cuddalore 607 109. This is not a women's diploma institute.

Diploma Courses Offered

A Cuddalore polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Krishnasamy Memorial Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Krishnasamy Memorial Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Krishnasamy Memorial Polytechnic College is Krishnasamy Memorial Polytechnic College, Nellikuppam High Road, S. Kumarapuram, Cuddalore 607 109, Tamil Nadu, India.

Mrk Polytechnic College

Mrk Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Mrk Polytechnic College, Nattarmangalam and Post, Kattumannar Koil. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Mrk Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Mrk Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Mrk Polytechnic College is Mrk Polytechnic College, Mrk Polytechnic College, Nattarmangalam and Post, Kattumannar Koil, Cuddalore, Tamil Nadu, India.

Muthiah Polytechnic College

Muthiah Polytechnic College is a Govt Aided diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Annamalainagar Chidambaram Cuddalore District Tamilnadu 608 002. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Muthiah Polytechnic College is a diploma college that offers 10 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Agricultural Technology (1st shift)
  • Part Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Part Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Part Time Diploma in First Year/Other (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Part Time Diploma in Mechanical Engineering (1st shift)

Muthiah Polytechnic College college offers a diploma in Agricultural Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Agricultural Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 15 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in First Year/Other. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for First Year/Other diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of Muthiah Polytechnic College is Muthiah Polytechnic College, Annamalainagar Chidambaram Cuddalore District Tamilnadu 608 002, Tamil Nadu, India.

Omm Muruga Polytechnic College

Omm Muruga Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Pottaveli Village, Virupatchi (Po), Kurinjipadi. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Omm Muruga Polytechnic College is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Omm Muruga Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Omm Muruga Polytechnic College is Omm Muruga Polytechnic College, Pottaveli Village, Virupatchi (Po), Kurinjipadi, Cuddalore, Tamil Nadu, India.

Padalesuwarar Polytechnic College

Padalesuwarar Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at K. K. Nagar Vannarapalayam Cuddalore. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Padalesuwarar Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Padalesuwarar Polytechnic College college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Padalesuwarar Polytechnic College is Padalesuwarar Polytechnic College, K. K. Nagar Vannarapalayam Cuddalore, Tamil Nadu, India.

Sree Arumugham Polytechnic College

Sree Arumugham Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Raja Nagar, Vaithiyanathapuram, Tholudur Post, Tittagudi Taluk. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sree Arumugham Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sree Arumugham Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Sree Arumugham Polytechnic College is Sree Arumugham Polytechnic College, Raja Nagar, Vaithiyanathapuram, Tholudur Post, Tittagudi Taluk, Cuddalore, Tamil Nadu, India.

Sri Ayyappa Polytechnic College

Sri Ayyappa Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Aivadhugudi, Eranji Post, Virudhachalam Taluk, Cuddalore District.. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Ayyappa Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)

Sri Ayyappa Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Sri Ayyappa Polytechnic College is Sri Ayyappa Polytechnic College, Aivadhugudi, Eranji Post, Virudhachalam Taluk, Cuddalore District., Tamil Nadu, India.

Sri Mahalakshmi Polytechnic College

Sri Mahalakshmi Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Vairankuppam, Semmankuppam Village, Poondiyankuppam Post, Cuddalore. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Mahalakshmi Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sri Mahalakshmi Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Sri Mahalakshmi Polytechnic College is Sri Mahalakshmi Polytechnic College, Vairankuppam, Semmankuppam Village, Poondiyankuppam Post, Cuddalore, Tamil Nadu, India.

Sri Venkateswara Polytechnic College

Sri Venkateswara Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Trichy National Highway. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Venkateswara Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sri Venkateswara Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Sri Venkateswara Polytechnic College is Sri Venkateswara Polytechnic College, Trichy National Highway, Cuddalore, Tamil Nadu, India.

Vigneshwara Polytechnic College

Vigneshwara Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Cuddalore - Chidambaram Ecr Highway, Keezhpoovanikuppam, Alapakkam (Po),. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Vigneshwara Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Part Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Part Time Diploma in Mechanical Engineering (1st shift)

Vigneshwara Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Vigneshwara Polytechnic College is Vigneshwara Polytechnic College, Cuddalore - Chidambaram Ecr Highway, Keezhpoovanikuppam, Alapakkam (Po),, Tamil Nadu, India.

Vivekananda Polytechnic College

Vivekananda Polytechnic College is a Unaided - Private diploma college located in the district of Cuddalore, Tamil Nadu state of India. This polytechnic college is located at Neyveli Main Road, Seplanatham and Po, Neyveli, Kurinjipadi Taluk.. This is not a women's diploma institute.

Diploma Courses Offered

A Cuddalore polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Vivekananda Polytechnic College is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Part Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Part Time Diploma in Mechanical Engineering (1st shift)

Vivekananda Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Vivekananda Polytechnic College is Vivekananda Polytechnic College, Neyveli Main Road, Seplanatham and Po, Neyveli, Kurinjipadi Taluk., Cuddalore, Tamil Nadu, India.