List of Polytechnic Colleges in Dharmapuri

Following list of polytechnic colleges or engineering schools are available in Dharmapuri, Tamil Nadu for studying Diploma Engineering. The Private and Government Polytechnic colleges in Dharmapuri have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Dharmapuri is here by elaborated.

You can view details of the following engineering school or polytechnic college location wise from the below college list.

122, Government Polytechnic College, Dharmapuri

122, Government Polytechnic College, Dharmapuri is a Government diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Temporary Site: Community Hall, Kerakodahalli Village, Karimangalm Post, Palacode Taluk, Dharmapuri District - 635111. Permanent Site: Survey No 211/1. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. 122, Government Polytechnic College, Dharmapuri is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

122, Government Polytechnic College, Dharmapuri college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of 122, Government Polytechnic College, Dharmapuri is 122, Government Polytechnic College, Dharmapuri, Temporary Site: Community Hall, Kerakodahalli Village, Karimangalm Post, Palacode Taluk, Dharmapuri District - 635111. Permanent Site: Survey No 211/1, Tamil Nadu, India.

Adiparasakthi Polytechnic College

Adiparasakthi Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Erumiyampatti - Village Kokkarapatti - Po Pappireddipatti - Tk, Dharmapuri - Dt. This is not a women's diploma institute.

Diploma Courses Offered

A Dharmapuri polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Adiparasakthi Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Adiparasakthi Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Training and Technical Education, New Delhi. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Training and Technical Education, New Delhi. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Training and Technical Education, New Delhi. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Training and Technical Education, New Delhi. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Training and Technical Education, New Delhi. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Adiparasakthi Polytechnic College is Adiparasakthi Polytechnic College, Erumiyampatti - Village Kokkarapatti - Po Pappireddipatti - Tk, Dharmapuri - Dt, Tamil Nadu, India.

Al Islamiya Polytechnic College

Al Islamiya Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Senganur Village Rajavur Po Pennagaram Tk Dharmapuri Dt Tamilnadu. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Al Islamiya Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Al Islamiya Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Al Islamiya Polytechnic College is Al Islamiya Polytechnic College, Senganur Village Rajavur Po Pennagaram Tk Dharmapuri Dt Tamilnadu, Tamil Nadu, India.

Dharmapuri District Co – Op Sugar Mills Polytechnic College

Dharmapuri District Co – Op Sugar Mills Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Dharmapuri District Co - Op Sugar Mills Polytechnic College, Palacode. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Dharmapuri District Co – Op Sugar Mills Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)
Full Time Diploma in Tool and Die Engineering (1st shift)

Dharmapuri District Co – Op Sugar Mills Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Tool and Die Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Tool and Die Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Dharmapuri District Co – Op Sugar Mills Polytechnic College is Dharmapuri District Co – Op Sugar Mills Polytechnic College, Dharmapuri District Co - Op Sugar Mills Polytechnic College, Palacode, Tamil Nadu, India.

Girivaasan Polytechnic College

Girivaasan Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Pauparapatti Main Road Pachanampatti Dharmapuri. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Girivaasan Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Science and Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Girivaasan Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Girivaasan Polytechnic College is Girivaasan Polytechnic College, Pauparapatti Main Road Pachanampatti Dharmapuri, Tamil Nadu, India.

Government Polytechnic College Kadathur

Government Polytechnic College Kadathur is a Government diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Government Polytechnic College, Bosinaickanahalli Village, Kadathur Post, Pappireddipatti Taluk, Dharmapuri District - 635303. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic College Kadathur is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic College Kadathur college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic College Kadathur is Government Polytechnic College Kadathur, Government Polytechnic College, Bosinaickanahalli Village, Kadathur Post, Pappireddipatti Taluk, Dharmapuri District - 635303, Tamil Nadu, India.

Jayam Polytechnic College

Jayam Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Nallanur Village, Konangihalli Post, Pennagaram Taluk. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Jayam Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Jayam Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Jayam Polytechnic College is Jayam Polytechnic College, Nallanur Village, Konangihalli Post, Pennagaram Taluk, Dharmapuri, Tamil Nadu, India.

Laxminarayana Polytechnic College

Laxminarayana Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Salem Dharmapuri Main Road, Bagalahalli (Po), Dharmapuri (Tk). This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Laxminarayana Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)
Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)

Laxminarayana Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 240 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Tool and Die). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Tool and Die) diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Laxminarayana Polytechnic College is Laxminarayana Polytechnic College, Salem Dharmapuri Main Road, Bagalahalli (Po), Dharmapuri (Tk), Tamil Nadu, India.

Marutam Nelli Polytechnic College

Marutam Nelli Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at 2/1. Agri Thottam, Pallapatty, Nathatahalli, Dharmapuri - 636803. This is not a women's diploma institute.

Diploma Courses Offered

A Dharmapuri polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Marutam Nelli Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Marutam Nelli Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Marutam Nelli Polytechnic College is Marutam Nelli Polytechnic College, 2/1. Agri Thottam, Pallapatty, Nathatahalli, Dharmapuri - 636803, Tamil Nadu, India.

Meenakshi Polytechnic College

Meenakshi Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Regadahalli (Po), Bommidi (Via), Pappireddipatti (Tk), Dharamapuri (Dt) - 635301.. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Meenakshi Polytechnic College is a diploma college that offers 10 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)
Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)
Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)

Meenakshi Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Meenakshi Polytechnic College is Meenakshi Polytechnic College, Regadahalli (Po), Bommidi (Via), Pappireddipatti (Tk), Dharamapuri (Dt) - 635301., Dharmapuri, Tamil Nadu, India.

Paramveer Polytechnic College

Paramveer Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Dharmapuri Main Road, Papparapatti, Dharmapuri. 636809. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Paramveer Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Automobile Engineering (1st shift)
Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)
Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)

Paramveer Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Paramveer Polytechnic College is Paramveer Polytechnic College, Dharmapuri Main Road, Papparapatti, Dharmapuri. 636809, Tamil Nadu, India.

Pee Gee Polytechnic College

Pee Gee Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at No. 7 Krishnagiri Main Road Periyanhalli Dharmapuri. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Pee Gee Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Pee Gee Polytechnic College college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Pee Gee Polytechnic College is Pee Gee Polytechnic College, No. 7 Krishnagiri Main Road Periyanhalli Dharmapuri, Tamil Nadu, India.

S. M. Arumugam Polytechnic College

S. M. Arumugam Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Adhiyamaan Bye Pass Road, A. Reddihalli, Dharmapuri. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. S. M. Arumugam Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

S. M. Arumugam Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of S. M. Arumugam Polytechnic College is S. M. Arumugam Polytechnic College, Adhiyamaan Bye Pass Road, A. Reddihalli, Dharmapuri, Tamil Nadu, India.

Shreenivasa Polytechnic College

Shreenivasa Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at B. Pallipatti (P. O), Pappireddipatti (T. K), Dharmapuri (D. T), Pin - 635 301.. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Shreenivasa Polytechnic College is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Automobile Engineering (1st shift)
Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)
Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)

Shreenivasa Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 240 for the academic year 2017-2018.

Contact Details

The addres of Shreenivasa Polytechnic College is Shreenivasa Polytechnic College, B. Pallipatti (P. O), Pappireddipatti (T. K), Dharmapuri (D. T), Pin - 635 301., Tamil Nadu, India.

Shri Krishna Polytechnic College

Shri Krishna Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at R. Gobinathampatty Post, Harur Taluk, Dharmapuri District. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Shri Krishna Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communications Engineering (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Shri Krishna Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Shri Krishna Polytechnic College is Shri Krishna Polytechnic College, R. Gobinathampatty Post, Harur Taluk, Dharmapuri District, Tamil Nadu, India.

Sree Kumaraguru Polytechnic College

Sree Kumaraguru Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Kumaraguru Nagar, Kokkarapatty (Po), P. R. Patty (Tk), Gopinathampatty Cross Road,. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sree Kumaraguru Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Automobile Engineering (1st shift)
Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communications Engineering (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Sree Kumaraguru Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Sree Kumaraguru Polytechnic College is Sree Kumaraguru Polytechnic College, Kumaraguru Nagar, Kokkarapatty (Po), P. R. Patty (Tk), Gopinathampatty Cross Road,, Dharmapuri, Tamil Nadu, India.

Sri Moogambigai Polytechnic College

Sri Moogambigai Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Hosur Main Road, Madhampatti, Near Vellichandhai, Dhandukaranahalli - Post. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Moogambigai Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Sri Moogambigai Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Sri Moogambigai Polytechnic College is Sri Moogambigai Polytechnic College, Hosur Main Road, Madhampatti, Near Vellichandhai, Dhandukaranahalli - Post, Dharmapuri, Tamil Nadu, India.

Sri Ramachandra Polytechnic College

Sri Ramachandra Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at 104/7 Alamelupuram (Po) Pappireddipati (Tk) Dharmapuri (Dt). This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Ramachandra Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Automobile Engineering (1st shift)
Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communication Engg (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)

Sri Ramachandra Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Sri Ramachandra Polytechnic College is Sri Ramachandra Polytechnic College, 104/7 Alamelupuram (Po) Pappireddipati (Tk) Dharmapuri (Dt), Tamil Nadu, India.

Sri Venkateshwaraa Polytechnic College

Sri Venkateshwaraa Polytechnic College is a Unaided - Private diploma college located in the district of Dharmapuri, Tamil Nadu state of India. This polytechnic college is located at Papinayakanahali Village Sogathur Post Dharmapuri. This is not a women's diploma institute.

Diploma Courses Offered

A Dharmapuri polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Venkateshwaraa Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

Full Time Diploma in Civil Engineering (1st shift)
Full Time Diploma in Computer Engineering (1st shift)
Full Time Diploma in Electrical and Electronics Engineering (1st shift)
Full Time Diploma in Electronics and Communications Engineering (1st shift)
Full Time Diploma in Mechanical Engineering (1st shift)
Full Time Diploma in Tool and Die Engineering (1st shift)

Sri Venkateshwaraa Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Sri Venkateshwaraa Polytechnic College is Sri Venkateshwaraa Polytechnic College, Papinayakanahali Village Sogathur Post Dharmapuri, Tamil Nadu, India.

Polytechnic College List