Polytechnic College List

List of Polytechnic Colleges in Karur, Tamil Nadu

Following list of polytechnic colleges or engineering schools are available in Karur, Tamil Nadu for studying Diploma Engineering. The Private and Government Polytechnic colleges in Karur have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Karur is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Arulmurugan Polytechnic College

Arulmurugan Polytechnic College is a Unaided - Private diploma college located in the district of Karur, Tamil Nadu state of India. This polytechnic college is located at Karvazhi Road Thennilai Aravakurichy - Tk Karur - Dt. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Arulmurugan Polytechnic College is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Garment Technology (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Arulmurugan Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Garment Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Garment Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Arulmurugan Polytechnic College is Arulmurugan Polytechnic College, Karvazhi Road Thennilai Aravakurichy - Tk Karur - Dt, Tamil Nadu, India.

Government Polytechnic College, Kaniyalampatti

Government Polytechnic College, Kaniyalampatti is a Government diploma college located in the district of Karur, Tamil Nadu state of India. This polytechnic college is located at Sinthamanipatti Via, Kadavur Taluk Karur 621301. This is not a women's diploma institute.

Diploma Courses Offered

A Karur polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic College, Kaniyalampatti is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (Industry Integrated) (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic College, Kaniyalampatti college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg (Industry Integrated). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg (Industry Integrated) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic College, Kaniyalampatti is Government Polytechnic College, Kaniyalampatti, Sinthamanipatti Via, Kadavur Taluk Karur 621301, Tamil Nadu, India.

Kongu Hi – Tek Polytechnic College

Kongu Hi – Tek Polytechnic College is a Unaided - Private diploma college located in the district of Karur, Tamil Nadu state of India. This polytechnic college is located at S. F. No. 94/2 Pungampadi West Village, Kanakuvelanpatty Post, Aravakurichi Taluk, Karur District, Pin 639 201. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Kongu Hi – Tek Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Kongu Hi – Tek Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Kongu Hi – Tek Polytechnic College is Kongu Hi – Tek Polytechnic College, S. F. No. 94/2 Pungampadi West Village, Kanakuvelanpatty Post, Aravakurichi Taluk, Karur District, Pin 639 201, Tamil Nadu, India.

Sitarajarampolytechniccollege

Sitarajarampolytechniccollege is a Unaided - Private diploma college located in the district of Karur, Tamil Nadu state of India. This polytechnic college is located at Muthunagar Hiraniyamangalammettupatti Kulitalaitaluk Karurdistrict Tamilnadu. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sitarajarampolytechniccollege is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sitarajarampolytechniccollege college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Sitarajarampolytechniccollege is Sitarajarampolytechniccollege, Muthunagar Hiraniyamangalammettupatti Kulitalaitaluk Karurdistrict Tamilnadu, Tamil Nadu, India.

The Karur Polytechnic College

The Karur Polytechnic College is a Unaided - Private diploma college located in the district of Karur, Tamil Nadu state of India. This polytechnic college is located at Sanjay Nagar Karur - Erode Main Road Athur - Post Karur - District Tamil Nadu. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. The Karur Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

The Karur Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of The Karur Polytechnic College is The Karur Polytechnic College, Sanjay Nagar Karur - Erode Main Road Athur - Post Karur - District Tamil Nadu, India.

Venkatramana Polytechnic College

Venkatramana Polytechnic College is a Unaided - Private diploma college located in the district of Karur, Tamil Nadu state of India. This polytechnic college is located at Venkattapuram, 45A, Velliyanai South Village, Karur Taluk Karur District. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Venkatramana Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Venkatramana Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Venkatramana Polytechnic College is Venkatramana Polytechnic College, Venkattapuram, 45A, Velliyanai South Village, Karur Taluk Karur District, Tamil Nadu, India.