Polytechnic College List

List of Polytechnic Colleges in Thanjavur, Tamil Nadu

Following list of polytechnic colleges or engineering schools are available in Thanjavur, Tamil Nadu for studying Diploma Engineering. The Private and Government Polytechnic colleges in Thanjavur have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Thanjavur is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Annai College of Polytechnic,

Annai College of Polytechnic, is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Anakudi Road, Kovilacheri, Kumbakonam. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Annai College of Polytechnic, is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Annai College of Polytechnic, college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 180 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 300 for the academic year 2017-2018.

Contact Details

The addres of Annai College of Polytechnic, is Annai College of Polytechnic,, Anakudi Road, Kovilacheri, Kumbakonam, Thanjavur, Tamil Nadu, India.

Arasu Polytechnic College

Arasu Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Chennai Main Road, Thiruvisanallur Village, Thiruvidaimaruthur Taluk, Kumbakonam - 612501, Thanjavur District. This is not a women's diploma institute.

Diploma Courses Offered

A Thanjavur polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Arasu Polytechnic College is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Arasu Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Tamil Nadu. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Tamil Nadu. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Tamil Nadu. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Arasu Polytechnic College is Arasu Polytechnic College, Chennai Main Road, Thiruvisanallur Village, Thiruvidaimaruthur Taluk, Kumbakonam - 612501, Thanjavur District, Tamil Nadu, India.

Bharath Institute of Catering Technology and Hotel Management

Bharath Institute of Catering Technology and Hotel Management is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Trichy Road Near New Busstand. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Bharath Institute of Catering Technology and Hotel Management is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Hotel Management and Catering Technology (1st shift)

Bharath Institute of Catering Technology and Hotel Management college offers a diploma in Hotel Management and Catering Technology. This course falls under the Hotel Management and Catering programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Hotel Management and Catering Technology diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Bharath Institute of Catering Technology and Hotel Management is Bharath Institute of Catering Technology and Hotel Management, Trichy Road Near New Busstand, Thanjavur, Tamil Nadu, India.

Chamber of Commerce Manali Ramakrishna Polytechnic College

Chamber of Commerce Manali Ramakrishna Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Kuruvadi Ramapuram Post. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Chamber of Commerce Manali Ramakrishna Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Diploma In Mechanical Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Information Technology (1st shift)

Chamber of Commerce Manali Ramakrishna Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Diploma In Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Diploma In Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of Chamber of Commerce Manali Ramakrishna Polytechnic College is Chamber of Commerce Manali Ramakrishna Polytechnic College, Kuruvadi Ramapuram Post, Thanjavur, Tamil Nadu, India.

Dr. Kalam Polytechnic College

Dr. Kalam Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Periyanayakipuram, Avanam (Po), Peravurani (Tk), Thanjavaur (Dt), Tamilnadu. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Dr. Kalam Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Dr. Kalam Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Dr. Kalam Polytechnic College is Dr. Kalam Polytechnic College, Periyanayakipuram, Avanam (Po), Peravurani (Tk), Thanjavaur (Dt), Tamilnadu, Thanjavur, Tamil Nadu, India.

Government Polytechnic College

Government Polytechnic College is a Government diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Ragunathapuram, Papanasam Taluk, Thanjavur District. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Government Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic College is Government Polytechnic College, Ragunathapuram, Papanasam Taluk, Thanjavur District, Tamil Nadu, India.

Manora Polytechnic College

Manora Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Kottakudi - Post Pattukkottai - Tkthanjavur - Dt. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Manora Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)

Manora Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Tool and Die). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Tool and Die) diploma course is 45 for the academic year 2017-2018.

Contact Details

The addres of Manora Polytechnic College is Manora Polytechnic College, Kottakudi - Post Pattukkottai - Tkthanjavur - Dt, Tamil Nadu, India.

Mass Polytechnic College, Kumbakonam

Mass Polytechnic College, Kumbakonam is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Chennai Salai, Kallapuliyur Village, Kumbakonam. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Mass Polytechnic College, Kumbakonam is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)

Mass Polytechnic College, Kumbakonam college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Mass Polytechnic College, Kumbakonam is Mass Polytechnic College, Kumbakonam, Chennai Salai, Kallapuliyur Village, Kumbakonam, Thanjavur, Tamil Nadu, India.

Meenatchi Govindarajan Polytechnic College

Meenatchi Govindarajan Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at 45, Nanjikottai Post. This is not a women's diploma institute.

Diploma Courses Offered

A Thanjavur polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Meenatchi Govindarajan Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Meenatchi Govindarajan Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Meenatchi Govindarajan Polytechnic College is Meenatchi Govindarajan Polytechnic College, 45, Nanjikottai Post, Thanjavur, Tamil Nadu, India.

Pattukkottai Polytechnic College

Pattukkottai Polytechnic College is a Govt Aided diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Palayam, Santhangadu,. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Pattukkottai Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechatronics (1st shift)

Pattukkottai Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechatronics. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechatronics diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Pattukkottai Polytechnic College is Pattukkottai Polytechnic College, Palayam, Santhangadu,, Thanjavur, Tamil Nadu, India.

Periyar Centenary Polytechnic College

Periyar Centenary Polytechnic College is a Govt Aided diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Periyar Nagar. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Periyar Centenary Polytechnic College is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Architecture Assitantship (Sandwich) (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Information Technology (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Modern Office Practice (1st shift)

Periyar Centenary Polytechnic College college offers a diploma in Architecture Assitantship (Sandwich). This course falls under the Architecture programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Architecture Assitantship (Sandwich) diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Modern Office Practice. This course falls under the Management programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Practice diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of Periyar Centenary Polytechnic College is Periyar Centenary Polytechnic College, Periyar Nagar, Thanjavur, Tamil Nadu, India.

Ponnaiyah Ramajayam Polytechnic College

Ponnaiyah Ramajayam Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Keelapalayar Village, Patteeswaram (Via), Kumbakonam. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ponnaiyah Ramajayam Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Ponnaiyah Ramajayam Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Ponnaiyah Ramajayam Polytechnic College is Ponnaiyah Ramajayam Polytechnic College, Keelapalayar Village, Patteeswaram (Via), Kumbakonam, Thanjavur, Tamil Nadu, India.

Ponnaiyah Ramajayam Polytechnic College

Ponnaiyah Ramajayam Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Thanjavur - Trichy Highways Vallam, Thanjavur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ponnaiyah Ramajayam Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Ponnaiyah Ramajayam Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Ponnaiyah Ramajayam Polytechnic College is Ponnaiyah Ramajayam Polytechnic College, Thanjavur - Trichy Highways Vallam, Thanjavur, Tamil Nadu, India.

Ramya Sathianathan Polytechnic College

Ramya Sathianathan Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Sengippatty To Budhalur Road Puduppatty Village Thanjavur District Tamil Nadu. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ramya Sathianathan Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Ramya Sathianathan Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Ramya Sathianathan Polytechnic College is Ramya Sathianathan Polytechnic College, Sengippatty To Budhalur Road Puduppatty Village Thanjavur District Tamil Nadu, India.

Shanmugha Polytechnic College

Shanmugha Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Sastra University Campus. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Shanmugha Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Shanmugha Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Shanmugha Polytechnic College is Shanmugha Polytechnic College, Sastra University Campus, Thanjavur, Tamil Nadu, India.

Vairamani Ramasamy Polytechnic College

Vairamani Ramasamy Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Thambikkottai Vadakkadu. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Vairamani Ramasamy Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Vairamani Ramasamy Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Vairamani Ramasamy Polytechnic College is Vairamani Ramasamy Polytechnic College, Thambikkottai Vadakkadu, Thanjavur, Tamil Nadu, India.

Vandayar Polytechnic College

Vandayar Polytechnic College is a Unaided - Private diploma college located in the district of Thanjavur, Tamil Nadu state of India. This polytechnic college is located at Pulavarnatham (Po), Mariamman Kovil (Via) Thanjavur - 613501.. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Vandayar Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Vandayar Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 240 for the academic year 2017-2018.

Contact Details

The addres of Vandayar Polytechnic College is Vandayar Polytechnic College, Pulavarnatham (Po), Mariamman Kovil (Via) Thanjavur - 613501., Tamil Nadu, India.