Polytechnic College List

List of Polytechnic Colleges in Virudhunagar, Tamil Nadu

Following list of polytechnic colleges or engineering schools are available in Virudhunagar, Tamil Nadu for studying Diploma Engineering. The Private and Government Polytechnic colleges in Virudhunagar have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Virudhunagar is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Ammaiappar Polytechnic College

Ammaiappar Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Puthur - Meenatchiyapuram Road, Meenatchiyapuram. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ammaiappar Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Ammaiappar Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Ammaiappar Polytechnic College is Ammaiappar Polytechnic College, Puthur - Meenatchiyapuram Road, Meenatchiyapuram, Virudhunagar, Tamil Nadu, India.

Angel Polytechnic College

Angel Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at R. S. No. 570 Tirunelveli Road South Venganallur Rajapalayam Taluk. This is not a women's diploma institute.

Diploma Courses Offered

A Virudhunagar polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Angel Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Angel Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Angel Polytechnic College is Angel Polytechnic College, R. S. No. 570 Tirunelveli Road South Venganallur Rajapalayam Taluk, Virudhunagar, Tamil Nadu, India.

Arasan Ganesan Polytechnic College

Arasan Ganesan Polytechnic College is a Govt Aided diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Virudhunagar Main Road, Anaikuttam (Po). This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Arasan Ganesan Polytechnic College is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Printing Technology (1st shift)
  • Full Time Diploma in Modern Office Practice (1st shift)

Arasan Ganesan Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Printing Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Printing Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Modern Office Practice. This course falls under the Management programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Practice diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of Arasan Ganesan Polytechnic College is Arasan Ganesan Polytechnic College, Virudhunagar Main Road, Anaikuttam (Po), Tamil Nadu, India.

Arulmigu Kalasalingam Polytechnic College

Arulmigu Kalasalingam Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Anand Nagar, Krishnankoil. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Arulmigu Kalasalingam Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Information Technology (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Arulmigu Kalasalingam Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Arulmigu Kalasalingam Polytechnic College is Arulmigu Kalasalingam Polytechnic College, Anand Nagar, Krishnankoil, Virudhunagar, Tamil Nadu, India.

Ayyanadar Janakiammal Polytechnic College

Ayyanadar Janakiammal Polytechnic College is a Govt Aided diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Chinnakkamanpatti. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ayyanadar Janakiammal Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Architecture Assitantship (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Ayyanadar Janakiammal Polytechnic College college offers a diploma in Architecture Assitantship. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Architecture Assitantship diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Ayyanadar Janakiammal Polytechnic College is Ayyanadar Janakiammal Polytechnic College, Chinnakkamanpatti, Virudhunagar, Tamil Nadu, India.

N. A. Manjammal Polytechnic College

N. A. Manjammal Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at M. P. K Post (Via) Rajapalayam. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. N. A. Manjammal Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

N. A. Manjammal Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of N. A. Manjammal Polytechnic College is N. A. Manjammal Polytechnic College, M. P. K Post (Via) Rajapalayam, Virudhunagar, Tamil Nadu, India.

P. A. C. Ramasamy Raja Polytechnic College

P. A. C. Ramasamy Raja Polytechnic College is a Govt Aided diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at K. R. Nagar Post. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. P. A. C. Ramasamy Raja Polytechnic College is a diploma college that offers 12 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (2nd shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Knitting and Garment Technology (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (Refrigeration and Air Conditioning) (1st shift)
  • Full Time Diploma in Textile Technology (1st shift)
  • Full Time Diploma in Modern Office Practice (1st shift)

P. A. C. Ramasamy Raja Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Knitting and Garment Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Knitting and Garment Technology diploma course is 20 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Refrigeration and Air Conditioning). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Refrigeration and Air Conditioning) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Textile Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Textile Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Modern Office Practice. This course falls under the Management programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Practice diploma course is 30 for the academic year 2017-2018.

Contact Details

The addres of P. A. C. Ramasamy Raja Polytechnic College is P. A. C. Ramasamy Raja Polytechnic College, K. R. Nagar Post, Virudhunagar, Tamil Nadu, India.

P. S. R. Polytechnic College

P. S. R. Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Appaiyanaickenpatti, Sivakasi Taluk, Virudhunagar Dist - 626 140. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. P. S. R. Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)

P. S. R. Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 240 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Tool and Die). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Tool and Die) diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of P. S. R. Polytechnic College is P. S. R. Polytechnic College, Appaiyanaickenpatti, Sivakasi Taluk, Virudhunagar Dist - 626 140, Tamil Nadu, India.

Ramu – Seetha Polytechnic College

Ramu – Seetha Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Ramu - Seetha Nagar Kariapatti. This is not a women's diploma institute.

Diploma Courses Offered

A Virudhunagar polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Ramu – Seetha Polytechnic College is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Ramu – Seetha Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 90 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

Contact Details

The addres of Ramu – Seetha Polytechnic College is Ramu – Seetha Polytechnic College, Ramu - Seetha Nagar Kariapatti, Virudhunagar, Tamil Nadu, India.

S. M. S Polytechnic College

S. M. S Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Kallamanaickanpatti Sivakasi - Taluk Virudhunagar - District. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. S. M. S Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

S. M. S Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of S. M. S Polytechnic College is S. M. S Polytechnic College, Kallamanaickanpatti Sivakasi - Taluk Virudhunagar - District, Tamil Nadu, India.

Sivakasi Institute of Printing Technology

Sivakasi Institute of Printing Technology is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at 32/1, A. Meenakshipuram, Anaikuttam (P. O).. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sivakasi Institute of Printing Technology is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Printing Technology (1st shift)

Sivakasi Institute of Printing Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Printing Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Printing Technology diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Sivakasi Institute of Printing Technology is Sivakasi Institute of Printing Technology, 32/1, A. Meenakshipuram, Anaikuttam (P. O)., Virudhunagar, Tamil Nadu, India.

Sri Boghar Polytechnic College

Sri Boghar Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at No. 2/158, Thiruchulli Road, Panthanaenthal Village, Pudhupatti (Post) Kariapatti (Tk) Virudhunagar (Dist). This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Boghar Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sri Boghar Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Sri Boghar Polytechnic College is Sri Boghar Polytechnic College, No. 2/158, Thiruchulli Road, Panthanaenthal Village, Pudhupatti (Post) Kariapatti (Tk) Virudhunagar (Dist), Tamil Nadu, India.

Sri S. Ramasamy Naidu Memorial Polytechnic College

Sri S. Ramasamy Naidu Memorial Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Venkatachalapuram. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri S. Ramasamy Naidu Memorial Polytechnic College is a diploma college that offers 6 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communications Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Tool and Die) (1st shift)

Sri S. Ramasamy Naidu Memorial Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communications Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communications Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Tool and Die). This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Tool and Die) diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Sri S. Ramasamy Naidu Memorial Polytechnic College is Sri S. Ramasamy Naidu Memorial Polytechnic College, Venkatachalapuram, Virudhunagar, Tamil Nadu, India.

Sri Sowdambika Polytechnic College

Sri Sowdambika Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Thiruchuli Road Chockalingapuram. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Sowdambika Polytechnic College is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Information Technology (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Refrigeration and Air Conditioning (1st shift)
  • Full Time Diploma in Textile Technology (1st shift)

Sri Sowdambika Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 180 for the academic year 2017-2018.

This college offers a diploma in Refrigeration and Air Conditioning. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Refrigeration and Air Conditioning diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Textile Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Textile Technology diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Sri Sowdambika Polytechnic College is Sri Sowdambika Polytechnic College, Thiruchuli Road Chockalingapuram, Virudhunagar, Tamil Nadu, India.

Sri Vatsa Polytechnic College

Sri Vatsa Polytechnic College is a Unaided - Private diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at E. Kumaralingapuram Road, Mettamalai, Sattur - 626203, Virudhunagar District.. This is not a women's diploma institute.

Diploma Courses Offered

A Tamil Nadu polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Sri Vatsa Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Automobile Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Sri Vatsa Polytechnic College college offers a diploma in Automobile Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Automobile Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education, Chennai. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Sri Vatsa Polytechnic College is Sri Vatsa Polytechnic College, E. Kumaralingapuram Road, Mettamalai, Sattur - 626203, Virudhunagar District., Tamil Nadu, India.

Virudhunagar S. Vellaichamy Nadar Polytechnic College

Virudhunagar S. Vellaichamy Nadar Polytechnic College is a Govt Aided diploma college located in the district of Virudhunagar, Tamil Nadu state of India. This polytechnic college is located at Rosalpatti Village Virudhunagar. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Virudhunagar S. Vellaichamy Nadar Polytechnic College is a diploma college that offers 13 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Electronics and Communication Engg (1st shift)
  • Full Time Diploma in Garment Technology (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)
  • Full Time Diploma in Modern Office Practice (1st shift)
  • Full Time Diploma in Plastic Technology (1st shift)
  • Full Time Diploma in Plastic Technology (1st shift)

Virudhunagar S. Vellaichamy Nadar Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics and Communication Engg. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics and Communication Engg diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Garment Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Garment Technology diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Modern Office Practice. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Practice diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Plastic Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastic Technology diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Plastic Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Directorate of Technical Education. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastic Technology diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Virudhunagar S. Vellaichamy Nadar Polytechnic College is Virudhunagar S. Vellaichamy Nadar Polytechnic College, Rosalpatti Village Virudhunagar, Tamil Nadu, India.