Polytechnic College List

List of Polytechnic Colleges in Jaunpur, Uttar Pradesh

Following list of polytechnic colleges or engineering schools are available in Jaunpur, Uttar Pradesh for studying Diploma Engineering. The Private and Government Polytechnic colleges in Jaunpur have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Jaunpur is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Awadh Paramedical College and Institute

Awadh Paramedical College and Institute is a Unaided - Private diploma college located in the district of Jaunpur, Uttar Pradesh state of India. This polytechnic college is located at 346, Nyansand, Saremu, Sadar, Jaunpur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Awadh Paramedical College and Institute is a diploma college that offers 1 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Pharmacy (1st shift)

Awadh Paramedical College and Institute college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 50 for the academic year 2017-2018.

Contact Details

The addres of Awadh Paramedical College and Institute is Awadh Paramedical College and Institute, 346, Nyansand, Saremu, Sadar, Jaunpur, Uttar Pradesh, India.

Bakhshi Polytechnic

Bakhshi Polytechnic is a Unaided - Private diploma college located in the district of Jaunpur, Uttar Pradesh state of India. This polytechnic college is located at Mujar Machhli Shahar Jaunpur, U. P.. This is not a women's diploma institute.

Diploma Courses Offered

A Jaunpur polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Bakhshi Polytechnic is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Auto) (1st shift)
  • Full Time Diploma in Mechanical Engineering (Prod) (1st shift)
  • Full Time Diploma in Mechanical Engineering (Prod) (1st shift)

Bakhshi Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Auto). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Auto) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 120 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Bakhshi Polytechnic is Bakhshi Polytechnic, Mujar Machhli Shahar Jaunpur, U. P., Uttar Pradesh, India.

Government Polytechnic, Jaunpur

Government Polytechnic, Jaunpur is a Government diploma college located in the district of Jaunpur, Uttar Pradesh state of India. This polytechnic college is located at Jagdishpur Varanasi Road. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic, Jaunpur is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Computer Science and Engineering (2nd shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electronic Engineering (1st shift)
  • Full Time Diploma in Electronic Engineering (2nd shift)
  • Full Time Diploma in Pharmacy (1st shift)

Government Polytechnic, Jaunpur college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronic Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronic Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronic Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electronic Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic, Jaunpur is Government Polytechnic, Jaunpur, Jagdishpur Varanasi Road, Jaunpur, Uttar Pradesh, India.

K. L. Polytechnic

K. L. Polytechnic is a Unaided - Private diploma college located in the district of Jaunpur, Uttar Pradesh state of India. This polytechnic college is located at Bharaura Malhani Po:Malhani Bazar. This is not a women's diploma institute.

Diploma Courses Offered

A Uttar Pradesh polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. K. L. Polytechnic is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Instrumentation and Control (1st shift)

K. L. Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Instrumentation and Control. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Instrumentation and Control diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of K. L. Polytechnic is K. L. Polytechnic, Bharaura Malhani Po:Malhani Bazar, Jaunpur, Uttar Pradesh, India.

Nirmala Devi Polytechnic College

Nirmala Devi Polytechnic College is a Unaided - Private diploma college located in the district of Jaunpur, Uttar Pradesh state of India. This polytechnic college is located at Nayansand Near Gaurabashahapur Thana. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Nirmala Devi Polytechnic College is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical and Electronics Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Prod) (1st shift)
  • Full Time Diploma in Mechanical Engineering Automobile (1st shift)

Nirmala Devi Polytechnic College college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Automobile. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Automobile diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Nirmala Devi Polytechnic College is Nirmala Devi Polytechnic College, Nayansand Near Gaurabashahapur Thana, Jaunpur, Uttar Pradesh, India.

Prasad Polytechnic

Prasad Polytechnic is a Unaided - Private diploma college located in the district of Jaunpur, Uttar Pradesh state of India. This polytechnic college is located at Punch - Hattia Sadar. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Prasad Polytechnic is a diploma college that offers 8 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Sceince and Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering Industrial Control (1st shift)
  • Full Time Diploma in Electronics Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Prod) (1st shift)
  • Full Time Diploma in Mechanical Engineering Specialization In Cad (1st shift)
  • Full Time Diploma in Pharmacy (1st shift)

Prasad Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Sceince and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Sceince and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering Industrial Control. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering Industrial Control diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Specialization In Cad. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Specialization In Cad diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Prasad Polytechnic is Prasad Polytechnic, Punch - Hattia Sadar, Jaunpur, Uttar Pradesh, India.

Radha Vallabh Institute of Technology

Radha Vallabh Institute of Technology is a Unaided - Private diploma college located in the district of Jaunpur, Uttar Pradesh state of India. This polytechnic college is located at Emampur Kuthan. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Radha Vallabh Institute of Technology is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (Auto) (1st shift)
  • Full Time Diploma in Mechanical Engineering (Prod) (1st shift)

Radha Vallabh Institute of Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Auto). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Auto) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Radha Vallabh Institute of Technology is Radha Vallabh Institute of Technology, Emampur Kuthan, Jaunpur, Uttar Pradesh, India.

Vijay Pratap Institute of Technology

Vijay Pratap Institute of Technology is a Unaided - Private diploma college located in the district of Jaunpur, Uttar Pradesh state of India. This polytechnic college is located at Near Zafrabad Police Station Varanasi Road Jaunpur - 222180. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Vijay Pratap Institute of Technology is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Mechanical Engineering (1st shift)

Vijay Pratap Institute of Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Vijay Pratap Institute of Technology is Vijay Pratap Institute of Technology, Near Zafrabad Police Station Varanasi Road Jaunpur - 222180, Uttar Pradesh, India.