Polytechnic College List

List of Polytechnic Colleges in Kanpur Nagar, Uttar Pradesh

Following list of polytechnic colleges or engineering schools are available in Kanpur Nagar, Uttar Pradesh for studying Diploma Engineering. The Private and Government Polytechnic colleges in Kanpur Nagar have an ultimate objective to provide qualitative technical education to the young diploma engineering aspirants. It also helps to set up a large number of diploma engineering colleges and institutes to pursue Diploma course in its horizon. These colleges or institutes however act as the gateway to acquire technical knowledge and comprehensive learning to make our society technically advanced. The list of polytechnic colleges at Kanpur Nagar is here by elaborated.





You can view details of the following engineering school or polytechnic college location wise from the below college list.

Apollo Institute of Technology

Apollo Institute of Technology is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Vill. Sundhela, Block Sarsaul, Kanpur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Apollo Institute of Technology is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of .

  • Full Time Diploma in Civil Engineering (2nd shift)
  • Full Time Diploma in Electrical Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)

Apollo Institute of Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 120 for the academic year 2017-2018.

Contact Details

The addres of Apollo Institute of Technology is Apollo Institute of Technology, Vill. Sundhela, Block Sarsaul, Kanpur, Kanpur Nagar, Uttar Pradesh, India.

Axis Institute of Technology and Management

Axis Institute of Technology and Management is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Vill - Hathipur, Kanpur Sadar. This is not a women's diploma institute.

Diploma Courses Offered

A Kanpur Nagar polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Axis Institute of Technology and Management is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Electrical Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)

Axis Institute of Technology and Management college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Axis Institute of Technology and Management is Axis Institute of Technology and Management, Vill - Hathipur, Kanpur Sadar, Kanpur Nagar, Uttar Pradesh, India.

Dr. Ambedkar Institute of Technology for Handicapped, U. P., Kanpur

Dr. Ambedkar Institute of Technology for Handicapped, U. P., Kanpur is a Govt Aided diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Awadhpuri Kanpur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Dr. Ambedkar Institute of Technology for Handicapped, U. P., Kanpur is a diploma college that offers 4 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Architectural Assistantship (1st shift)
  • Full Time Diploma in Computer Sceince and Engineering (1st shift)
  • Full Time Diploma in Electronics Engineering (Self - Financed) (1st shift)
  • Full Time Diploma in Modern Office Management and Secretarial Practice (1st shift)

Dr. Ambedkar Institute of Technology for Handicapped, U. P., Kanpur college offers a diploma in Architectural Assistantship. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Architectural Assistantship diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Computer Sceince and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Sceince and Engineering diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Electronics Engineering (Self - Financed). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronics Engineering (Self - Financed) diploma course is 40 for the academic year 2017-2018.

This college offers a diploma in Modern Office Management and Secretarial Practice. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Management and Secretarial Practice diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Dr. Ambedkar Institute of Technology for Handicapped, U. P., Kanpur is Dr. Ambedkar Institute of Technology for Handicapped, U. P., Kanpur, Awadhpuri Kanpur, Kanpur Nagar, Uttar Pradesh, India.

Government Leather Institute Kanpur

Government Leather Institute Kanpur is a Government diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at 11/208 A Souterganj Parwati Bagla Road, Kanpur 208001. This is not a women's diploma institute.

Diploma Courses Offered

A Uttar Pradesh polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Leather Institute Kanpur is a diploma college that offers 7 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Leather Technology Footwear Computer Aided Shoe Design (1st shift)
  • Full Time Diploma in Leather Technology Footwear Computer Aided Shoe Design (2nd shift)
  • Part Time Diploma in Leather Technology Footwear Computer Aided Shoe Design (1st shift)
  • Full Time Diploma in Leather Technology Tanning (1st shift)
  • Full Time Diploma in Leather Technology Tanning (2nd shift)
  • Part Time Diploma in Leather Technology Tanning (1st shift)
  • Full Time Diploma in Saddlery Technology and Export Management (1st shift)

Government Leather Institute Kanpur college offers a diploma in Leather Technology Footwear Computer Aided Shoe Design. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Leather Technology Footwear Computer Aided Shoe Design diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Leather Technology Footwear Computer Aided Shoe Design. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Leather Technology Footwear Computer Aided Shoe Design diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Leather Technology Footwear Computer Aided Shoe Design. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Leather Technology Footwear Computer Aided Shoe Design diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Leather Technology Tanning. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Leather Technology Tanning diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Leather Technology Tanning. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Leather Technology Tanning diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Leather Technology Tanning. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Leather Technology Tanning diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Saddlery Technology and Export Management. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Saddlery Technology and Export Management diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Leather Institute Kanpur is Government Leather Institute Kanpur, 11/208 A Souterganj Parwati Bagla Road, Kanpur 208001, Kanpur Nagar, Uttar Pradesh, India.

Government Polytechnic Ghatampur

Government Polytechnic Ghatampur is a Government diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Ramsari Road Ghatampur Kanpur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic Ghatampur is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Mechanical Engineering (Maintenance) (1st shift)
  • Full Time Diploma in Mechanical Engineering (Prod) (1st shift)
  • Full Time Diploma in Mechanical Engineering Automobile (1st shift)

Government Polytechnic Ghatampur college offers a diploma in Mechanical Engineering (Maintenance). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Maintenance) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Automobile. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Automobile diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic Ghatampur is Government Polytechnic Ghatampur, Ramsari Road Ghatampur Kanpur, Kanpur Nagar, Uttar Pradesh, India.

Government Polytechnic Kanpur

Government Polytechnic Kanpur is a Government diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Gt Road, Vikas Nagar, Near Gurudev Palace. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Government Polytechnic Kanpur is a diploma college that offers 33 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Chemical Engineering (1st shift)
  • Full Time Diploma in Chemical Engineering (2nd shift)
  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Civil Engineering (2 Shift) (2nd shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (2nd shift)
  • Full Time Diploma in Electronic Engineering (1st shift)
  • Full Time Diploma in Electronic Engineering (2nd shift)
  • Part Time Diploma in Electronics Engineering (1st shift)
  • Full Time Diploma in Information Technology (1st shift)
  • Full Time Diploma in Information Technology (2nd shift)
  • Full Time Diploma in Instrumentation and Control Engineering (1st shift)
  • Full Time Diploma in Instrumentation and Control Engineering (2nd shift)
  • Part Time Diploma in Mechanical Engineering (Prod) (1st shift)
  • Full Time Diploma in Mechanical Engineering Auto Mobile (2nd shift)
  • Full Time Diploma in Mechanical Engineering Automobile (1st shift)
  • Full Time Diploma in Mechanical Engineering Production (1st shift)
  • Full Time Diploma in Mechanical Engineering Production (2nd shift)
  • Full Time Diploma in Paint Technology (1st shift)
  • Full Time Diploma in Plastic and Mould Technology (1st shift)
  • Full Time Diploma in Textile Chemistry (1st shift)
  • Full Time Diploma in Textile Chemistry (2nd shift)
  • Full Time Diploma in Textile Technology (1st shift)
  • Full Time Diploma in Textile Technology (2nd shift)
  • Full Time Diploma in Computer Applications (1st shift)
  • Full Time Diploma in Computer Applications (2nd shift)
  • Part Time Diploma in Computer Applications (1st shift)
  • Full Time Diploma in Computer Hardware and Networking (1st shift)
  • Full Time Diploma in Web Designing (1st shift)
  • Full Time Diploma in Accountancy With Computerized Account and Taxation (1st shift)
  • Full Time Diploma in Marketing and Sales Management (1st shift)
  • Full Time Diploma in Marketing and Sales Management (2nd shift)
  • Full Time Diploma in Retail Management (1st shift)

Government Polytechnic Kanpur college offers a diploma in Chemical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Chemical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Chemical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Chemical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Civil Engineering (2 Shift). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering (2 Shift) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronic Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronic Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronic Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electronic Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Electronics Engineering diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Instrumentation and Control Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Instrumentation and Control Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Instrumentation and Control Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Instrumentation and Control Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 30 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Auto Mobile. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Auto Mobile diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Automobile. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Automobile diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Production. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Production diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Production. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Production diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Paint Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Paint Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Plastic and Mould Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Plastic and Mould Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Textile Chemistry. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Textile Chemistry diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Textile Chemistry. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Textile Chemistry diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Textile Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Textile Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Textile Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Textile Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Applications. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Applications diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Applications. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Computer Applications diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Applications. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Part Time diploma course. The maximum allowed student intake for Computer Applications diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Hardware and Networking. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Hardware and Networking diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Web Designing. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Web Designing diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Accountancy With Computerized Account and Taxation. This course falls under the Management programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Accountancy With Computerized Account and Taxation diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Marketing and Sales Management. This course falls under the Management programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Marketing and Sales Management diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Marketing and Sales Management. This course falls under the Management programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Marketing and Sales Management diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Retail Management. This course falls under the Management programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Retail Management diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Government Polytechnic Kanpur is Government Polytechnic Kanpur, Gt Road, Vikas Nagar, Near Gurudev Palace, Kanpur Nagar, Uttar Pradesh, India.

Indus Institute of Technology and Management

Indus Institute of Technology and Management is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Kakwan Road, Vill : Barauli, Tehsil : Bilhaur Distt: Kanpur Nagar (U. P.). This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Indus Institute of Technology and Management is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (Prod) (2nd shift)
  • Full Time Diploma in Mechanical Engineering Automobile (2nd shift)

Indus Institute of Technology and Management college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 42 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering (Prod). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering (Prod) diploma course is 42 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Automobile. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Automobile diploma course is 42 for the academic year 2017-2018.

Contact Details

The addres of Indus Institute of Technology and Management is Indus Institute of Technology and Management, Kakwan Road, Vill : Barauli, Tehsil : Bilhaur Distt: Kanpur Nagar (U. P.), Uttar Pradesh, India.

Mga Institute of Polytechnic

Mga Institute of Polytechnic is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Arazi No - 945 Purwameer, Block Sarsaul, Kanpur - 209402. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Mga Institute of Polytechnic is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (Industrial Control) (1st shift)
  • Full Time Diploma in Mechanical Engineering Automobile (1st shift)
  • Full Time Diploma in Mechanical Engineering ( Production) (1st shift)

Mga Institute of Polytechnic college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering (Industrial Control). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering (Industrial Control) diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Automobile. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Automobile diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering ( Production). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering ( Production) diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Mga Institute of Polytechnic is Mga Institute of Polytechnic, Arazi No - 945 Purwameer, Block Sarsaul, Kanpur - 209402, Kanpur Nagar, Uttar Pradesh, India.

Naraina College of Engineerring and Technology

Naraina College of Engineerring and Technology is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at 1423/1, Ratanpur, Panki, Kanpur - 208020 (Up) India. This is not a women's diploma institute.

Diploma Courses Offered

A Kanpur Nagar polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Naraina College of Engineerring and Technology is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Electrical and Electronics Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)

Naraina College of Engineerring and Technology college offers a diploma in Electrical and Electronics Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Electrical and Electronics Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Naraina College of Engineerring and Technology is Naraina College of Engineerring and Technology, 1423/1, Ratanpur, Panki, Kanpur - 208020 (Up) India, Kanpur Nagar, Uttar Pradesh.

Naraina Polytechnic Institute

Naraina Polytechnic Institute is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Gangaganj, Panki, Kanpur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Naraina Polytechnic Institute is a diploma college that offers 5 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (1st shift)
  • Full Time Diploma in Electrical Engineering (1st shift)
  • Full Time Diploma in Mass Communication (1st shift)
  • Full Time Diploma in Mechanical Engineering Automobile (1st shift)
  • Full Time Diploma in Mechanical Engineering ( Production) (1st shift)

Naraina Polytechnic Institute college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electrical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electrical Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mass Communication. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mass Communication diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering Automobile. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering Automobile diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering ( Production). This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering ( Production) diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Naraina Polytechnic Institute is Naraina Polytechnic Institute, Gangaganj, Panki, Kanpur, Kanpur Nagar, Uttar Pradesh, India.

Naraina Vidya Peeth Engineering and Management Institute

Naraina Vidya Peeth Engineering and Management Institute is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Gangaganj, Panki, Kanpur - 208020 (Up) India. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Naraina Vidya Peeth Engineering and Management Institute is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)

Naraina Vidya Peeth Engineering and Management Institute college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Naraina Vidya Peeth Engineering and Management Institute is Naraina Vidya Peeth Engineering and Management Institute, Gangaganj, Panki, Kanpur - 208020 (Up) India, Kanpur Nagar, Uttar Pradesh.

Shri Ramdevi Ramdayal Tripathi Mahilapolytechnic Saket Nagar Kanpur

Shri Ramdevi Ramdayal Tripathi Mahilapolytechnic Saket Nagar Kanpur is a Govt Aided diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at 781 W - 1 Saket Nagar. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Shri Ramdevi Ramdayal Tripathi Mahilapolytechnic Saket Nagar Kanpur is a diploma college that offers 10 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Computer Science and Engineering (1st shift)
  • Full Time Diploma in Electronic Engineering (1st shift)
  • Full Time Diploma in Information Technology (1st shift)
  • Full Time Diploma in Library and Information Science (1st shift)
  • Full Time Diploma in Library and Information Science (2nd shift)
  • Full Time Diploma in Modern Office Management and Secretarial Practice (1st shift)
  • Full Time Diploma in Modern Office Management and Secretarial Practice (2nd shift)
  • Full Time Diploma in Computer Applications (1st shift)
  • Full Time Diploma in Post Graduate Diploma In Computer Application (1st shift)
  • Full Time Diploma in Pharmacy (1st shift)

Shri Ramdevi Ramdayal Tripathi Mahilapolytechnic Saket Nagar Kanpur college offers a diploma in Computer Science and Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Science and Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Electronic Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Electronic Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Information Technology. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Information Technology diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Library and Information Science. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Library and Information Science diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Library and Information Science. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Library and Information Science diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Modern Office Management and Secretarial Practice. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Management and Secretarial Practice diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Modern Office Management and Secretarial Practice. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Management and Secretarial Practice diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Computer Applications. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Computer Applications diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Post Graduate Diploma In Computer Application. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Post Graduate Diploma In Computer Application diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Pharmacy. This course falls under the Pharmacy programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Pharmacy diploma course is 40 for the academic year 2017-2018.

Contact Details

The addres of Shri Ramdevi Ramdayal Tripathi Mahilapolytechnic Saket Nagar Kanpur is Shri Ramdevi Ramdayal Tripathi Mahilapolytechnic Saket Nagar Kanpur, 781 W - 1 Saket Nagar, Kanpur Nagar, Uttar Pradesh, India.

United Institute of Designing….

United Institute of Designing…. is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at 3A/161 Azad Nagar Kanpur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. United Institute of Designing…. is a diploma college that offers 3 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Fashion Design and Garment Technology (1st shift)
  • Full Time Diploma in Modern Office Management and Secretarial Practices (1st shift)
  • Full Time Diploma in Post Graduate Diploma In Computer Application (1st shift)

United Institute of Designing…. college offers a diploma in Fashion Design and Garment Technology. This course falls under the Applied Arts and Crafts programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Fashion Design and Garment Technology diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Modern Office Management and Secretarial Practices. This course falls under the Management programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Modern Office Management and Secretarial Practices diploma course is 45 for the academic year 2017-2018.

This college offers a diploma in Post Graduate Diploma In Computer Application. This course falls under the Mca programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 1st shift and is a Full Time diploma course. The maximum allowed student intake for Post Graduate Diploma In Computer Application diploma course is 45 for the academic year 2017-2018.

Contact Details

The addres of United Institute of Designing…. is United Institute of Designing…., 3A/161 Azad Nagar Kanpur, Kanpur Nagar, Uttar Pradesh, India.

Vision Institute of Technology

Vision Institute of Technology is a Unaided - Private diploma college located in the district of Kanpur Nagar, Uttar Pradesh state of India. This polytechnic college is located at Hathipur, Mahrajpur Nh - 2 Knapur. This is not a women's diploma institute.

Diploma Courses Offered

A polytechnic college offers diploma courses that are short term courses (usually 1-3 years in duration) that focus on training a person in a particular field. Vision Institute of Technology is a diploma college that offers 2 part time / full time diploma engineering and non-engineering courses. All the courses of this college shown here is approved by All India Council for Technical Education (AICTE), New Delhi for the academic year of 2017-2018.

  • Full Time Diploma in Civil Engineering (2nd shift)
  • Full Time Diploma in Mechanical Engineering (2nd shift)

Vision Institute of Technology college offers a diploma in Civil Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Civil Engineering diploma course is 60 for the academic year 2017-2018.

This college offers a diploma in Mechanical Engineering. This course falls under the Engineering and Technology programme. This course is affiliated under Uttar Pradesh Board of Technical Education, Lucknow. This course is offered in 2nd shift and is a Full Time diploma course. The maximum allowed student intake for Mechanical Engineering diploma course is 60 for the academic year 2017-2018.

Contact Details

The addres of Vision Institute of Technology is Vision Institute of Technology, Hathipur, Mahrajpur Nh - 2 Knapur, Kanpur Nagar, Uttar Pradesh, India.